Image for Illustrative Purposes Only
Unisonics Logo

Unisonics FXP14 - 10L Ultrasonic Cleaner with Mechanical Timer (With Heat)




$2,631.20 including GST
Available with short lead time

own it from $10 a week with Group 2 Copy Created with Sketch.

Shipping & Delivery

The Unisonics FXP range is a single chamber device used to clean instruments and other
hardware with ultrasonic energy in a mixed water/chemical solution.

  • Model: FXP14MH

  • Timer: Mechanical (30min)

  • Heating Power: 300W

  • Tank Material: Pressed 304 Stainless Steel

  • Tank Capacity: 10L

  • Transducer Frequency: 40kHz

  • Ultrasonic Power: 200W

  • Overall Dimensions: 375 x 270 x 290mm

  • Internal Tank: 295 x 240 x 150mm

  • Gross Weight: 6.2kg

  • Basket Standard: 250 x 200 x 100mm with 9mm Mesh Aperture

  • Lid: Standard - Clear Plastic Included

  • Valve: Standard - Front Left

  • Certified by the Australian Made Campaign as Made and Owned in Australia.

  • Power is supplied by one single phase 10A plug.

  • Operating temperature should not exceed 60 °C to maintain reliability and efficiency.

  • Minimum operating depth should not be less than 80mm.

  • Care should always be taken to avoid excessive spillage of solution when draining fluid.

  • Resin coated transducers and circuit board for moisture protection.

  • AS/NZS 3760:2010

  • AS/NZS 3100:2017

  • Certificate of Conformity No:E990002-(C-Tick)

  • Certificate for inclusion of medical device - Class 1 (T.G.A.)


A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $175 excluding GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.


All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.