New
New
The Tempo Communications Micro Optical Power Meters (OPM210 and OPM220) are available in standard and high-power versions for the Telco and MSO markets. Absolute and referenced power measurements ensure fast and accurate loss budget and insertion loss measurements. When placing tones on the fiber using a Tempo Communications source provides the optical power meter will definitively identify fiber optic cables.
Discover the Tempo OPM210 Micro Optical Power Meter at Mektronics Australia – your trusted source for quality tools and equipment!
Standard and High Power Optical Power Meters
Measure Optical Power (dB, dBm & mW)
Accurate Insertion Loss Measurements
Tone and Probe Fiber Networks at 270Hz, 1kHz and 2kHz
Absolute or Referenced Optical Power Measurements
Integrated Visual Fault Locator
Integrated Flash Light
InGaAs detector for Maximum Sensitivity
Calibrated Wavelengths 850nm, 1300nm, 1310nm, 1490nm, 1550nm & 1625nm
Universal Bulkheads
Compatible with Singlemode and Multimode Networks
Auto Off or Continuous On Operation
AA Battery Operation
Measuring Range | OPM210: -70 to + 10dBm (1310/1490/1550/1625); -60 to +10dBm (850/1300) |
Measuring Range | OPM220: -50 to +26dBm (1310/1490/1550/1625); -40 to +26dBm (850/1300) |
Calibrated Wavelengths | 850, 1300, 1310, 1490, 1550, 1625nm |
Display Resolution | 0.01dB |
Connector | Universal 2.5mm |
Accuracy | +/-0.25dB |
Linearity | OPM210: +/-0.5dB (+10 to -3dBm); +/-0.1dB (-3 to -50dBm); +/-0.5dB (-50 to -70dBm) / OPM220: +/-0.5dB +26 to -3dBm; +/-0.1dB -3 to -50dBm |
Wavelength Response | 700 - 1700nm |
Detector Type | InGaAs |
Power Supply | AAA x 2 Alkaline |
Battery Life | >60 Hours (OPM mode) |
Operating Temperature | -10 to +50°C (<90% Relative Humidity) |
Storage Temperature | -20 to +60°C (<90% Relative Humidity) |
VFL Wavelength | 650nm +/-20nm |
VFL Output | Less than or equal to 1mW/ 2Hz |
VFL Range | 4km |
Size | 106 x 58 x 28mm (4.17 x 2.28 x 1.10”) |
Weight | 106g (0.23lbs) |
Automatic Shut-Off | 10 minutes of no activity |
Certifications | CE, RoHS, CDRH, WEEE |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.