Image for Illustrative Purposes Only
RUKO Ultimatecut Taper & Deburring Countersinker Set HSSE-Co 5 RUnaTEC DIN 335 Type C 90° in Plastic Case, 6 Pce
SKU: RUK102790EPRO
102790EPRO
DESCRIPTION
Application
Specifications
Shipping & Delivery
RUKO Ultimatecut Taper & Deburring Countersinker Set HSSE-Co 5 RUnaTEC DIN 335 Type C 90° in Plastic Case, 6 Pce
The newly developed cutting geometry of the ULTIMATECUT enormously reduces the axial and radial forces, which are affecting the tool during the countersinking. The variably running relief grinding was specially developed and ensures a very quiet countersinking procedure and a perfect surface quality, which guarantees the best results. (The new RUnaTEC coating further increases performance). The specially developed flute parameters, such as the angle, the transition radius as well as the extra-wide chip flute, ensure an optimal chip and heat removal and therefore enable a high wear resistance. Furthermore, the new geometry prevents material welding and reduces the countersinking force. Considerably less feed power while countersinking is now necessary. The materials can be handled either with a very high as well as with a very low cutting speed, without loss of quality/loosing quality concerning the result. The ULTIMATECUT achieves the best performance in mostly all applications and materials!
6-piece set of ULTIMATECUT taper and deburring countersinkers (DIN 335) type C 90° Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm
6-piece set of ULTIMATECUT taper and deburring countersinkers (DIN 335) type C 90° Ø 6,3 - 8,3 - 10,4 - 12,4 - 16,5 - 20,5 mm
Discover the RUKO Ultimatecut Taper & Deburring Countersinker Set HSSE-Co 5 RUnaTEC DIN 335 Type C 90° in Plastic Case, 6 Pce at Mektronics Australia – your trusted source for quality tools and equipment!
| Main application | Steel 900 N/mm² |
| Steel 1100 N/mm² | |
| Steel 1300 N/mm² | |
| Stainless steel | |
| Aluminium | |
| Brass | |
| Plastics | |
| Other application | Bronze |
| Cast iron |
Material: HSSE-Co 5
Coated: RUnaTEC coating
Cutting Direction: right hand cutting
Number of Cutting Edges: 3
DIN: 335
Form: type C 90°
Sinking Angle: 90°
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
