Prostat PRS-801-W 5lb Conductive Rubber Electrode

• Used in point to point and point to ground resistance testing.

• Provides repeatable measurements in accordance with ESD Association standards.

• Weighs 5 lbs. (2.27Kg) each ± 2 oz.

• Durometer hardness of 50-70.

• Less than 1,000 ohms resistance at 10V on metal test plate

WEIGHT: 5 lbs (2.27 kg) each ±2oz

DIAMETER OF PAD CONTACT SURFACE: 2.5 ± 0.1 inches (63.5 ± 0.25mm)

HEIGHT: With Handle: 5.0 inches (127mm); Without Handle: 3.75 inches (95.25mm)

PAD MATERIAL: Durometer hardness of 50-70

RESISTANCE: Resistance between 2 each electrodes on a clean metal plate should measure < 1,000 ohms at 10 volts. 1 each electrode should measure < 500 ohms at 10 volts on a clean metal plate.

The PRS-801-W electrodes comply with the following ANSI/ESD Standards:

• ANSI/ESD STM2.1 - Garments

• ANSI/ESD S4.1 - Worksurfaces

• ANSI/ESD STM7.1 - Flooring

• ANSI/ESD STM12.1 - Seating & Mobile Equipment

• As outlined in TR53 Compliance Verification of ESD Protective Equipment and Materials

CONNECTION: One female banana receptacle

COLOR: Grey

HANDLE COLOR: Black

CAP COLOR: Red

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.