Image for Illustrative Purposes Only
Premium Anti-Static Bench Matting, Grey, 600mm x 1500mm
SKU: ABM6001500GR
6001500
DESCRIPTION
Specifications
Shipping & Delivery
Premium Anti-Static Bench Matting, Grey, 600mm x 1500mm
Dual layer static dissipative rubber matting is a premium quality, highly durable work surface for ESD sensitive environment.
The dissipative top layer is resistant to abrasion, heat, solder, flux and most commonly used solvents.
The black conductive bottom layer provides a superior and consistent ground path.
These mats meet the requirements of
US ESD Associations ANSI S4.1 and S20.20 guidelines. The smooth texture can be easily cleaned and maintained. This product is also RoHS certified.
ACCESSORIES REQUIRED FOR GROUNDING (AVAILABLE AT ADDITIONAL COST):
ESD Hardware Kit - including Push & Clinch Male Snap Stud 10mm, Dual Jack Ground Cord, Clipsal Grounding Plug, Adjustable Wrist Strap & Cord 6'
ESD Hardware Kit Plus including Push & Clinch Male Snap Stud 10mm, Low Profile Dome Top Ground Cord, Under Bench Grouding Mount, Clipsal Grounding Plug, Adjustable Wrist Strap & Cord 6'
Discover the Premium Anti-Static Bench Matting, Grey, 600mm x 1500mm at Mektronics Australia – your trusted source for quality tools and equipment!
-
Size: 600 x 1500mm
-
Material: Synthetic rubber
-
Construction: Two-layer, static dissipative top surface, black conductive bottom layer
-
Thickness: 0.076 inch (2.00mm) - (nominal)
-
Colour: Grey (note colour may vary between lots and mills)
-
Surface Texture: Abrasion resistant smooth texture
-
Hardness: Per ASTM D2240 upper dissipative layer: 65 + 5 Shore A, lower conductive layer: 75 + 5 Shore A
-
Scratch Resistance: No clear scratch and well recovery
-
Heat Resistance: Resist hold irons and hot paste
-
UV Resistance: No discoloration
-
Chemical Resistance: With no discolorations after contacting with IPA, acetone or commonly used solvents
-
Point to point resistance: 1E6 to 1E8 ohms per ANSI/ESD S4.1
-
Point to ground resistance: 1E6 to 1E8 ohms per ANSI/ESD S4.1 Charge Decay: < 0.1 sec per FTMS 101C, M4046
-
Others: No curling, No pin holes, No irritant odour
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
