Compact performance: 154L/min free air. Suitable for framing gun and finishing gun. Impressive performance in a compact design.
The Peerless Black 2500 is designed for the building industry and home handyman, being one of the largest direct drives on the market producing 154 litres of free air delivery per minute, the PB2500 also ensures a more compact lightweight compressor that is portable and fits easily in the back of a utility.
Suitable for framing gun and finishing gun but not suitable for a coil gun, for a coil gun we recommend using the Peerless Black 14000 belt drive air compressor.
For a light industrial air compressor it packs a lot of punch but it also has its limitations, keep in mind for high air demands you will have to step it up to a bigger air compressor like a belt drive, be sure to check your air tools for the air flow requirements but most importantly use our "Find the right air compressor" tool located on our home page to assist in making the right decision for your air needs.
Important
Please note: air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important - first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have be better than 230 volt at peak times. Extension leads will cause voltage drop, it's better to use extra air hose.
Performance of all our belt driven air compressors are to AS4637.
NOTE: Bulky items may incur additional freight charges.
Discover the Peerless Black 2500 Direct Drive Single Phase Air Compressor PB2500 at Mektronics Australia – your trusted source for quality tools and equipment!
Brand: Peerless Trade
Part Number: PB2500
Free Air Delivery (LPM): 1540 LPM
Max PSI: 145
Motor HP: 2.5
Warranty Pump: 1 Year
Warranty Motor: 1 Year
Tank Capacity (L): 30L
Pump up time to 100PSI: 1.35-1.40 Min
Dimensions (mm): 780L x 350W x 650H
Weight (kg): 25kg
Cooling Method: Air Cooled
Pump Type: Alloy Direct Drive
Cylinders: 1
Pump Head Tension: 7.8 FT LB/11NM
Oil Capacity: 550mL
Pump RPM: 2850
Outlet Thread: 1/4" BSP
Electricity: 240V/10A
Amps Draw: 8
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.