Image for Illustrative Purposes Only
Panasonic EY6220NQ Ni-MH 2.4V 2.8Ah Cordless Drill
SKU: EY6220NQ
EY6220NQ
DESCRIPTION
Specifications
Shipping & Delivery
Panasonic EY6220NQ Ni-MH 2.4V 2.8Ah Cordless Drill
For small appliance repair or production/assembly tasks. The Panasonic EY6220NQ Ni-MH 2.4V 2.8Ah cordless drill and driver kit is purpose-built to meet the needs of appliance repair and circuit board or small equipment production/assembly line workers.
The center of the tool pivots in three positions, from screwdriver-grip to pistol-grip mode, to best match repetitive fastening tasks. Weighing only 0.9 lbs. with battery and only 9-3/8” long x 5” high x 1-7/16” wide, the reversible, two-speed tool can be set to produce 200 no-load rpm/26 in. lbs. in low speed and 400 no-load rpm/13 in.-lbs. in high speed. The six-stage clutch delivers 3.5, 6.3, 9.1, 11.9, 14.7, and 17.5 in. lbs. of torque. The gear case can be locked to use the tool in a manual driving mode. Using the Panasonic EY0L11B charger, the battery reaches full charge in 45 minutes. The kit comes with one 2.4-volt 2.8Ah Ni-MH battery.
|
Discover the Panasonic EY6220NQ Ni-MH 2.4V 2.8Ah Cordless Drill at Mektronics Australia – your trusted source for quality tools and equipment! |
|
| Battery | 2.8Ah Ni-MH |
| Compact Size | 9-3/8" x 5" x 1-7/16" (in straight format) |
| Light Weight | 0.9 lbs |
| High Power | Low: 26 in. lbs High: 13 in. lbs |
| Variable Speed Control | Low: 200 rpm High: 400 rpm |
| Clutch Torque (approx.) | 3.5, 6.3, 9.1, 11.9, 14.7, 17.5 in. lbs. (multi-stage) (max torque at 6 position) |
| Chuck | 1/4" hex drive |
| Gear Box | 2-speed gear box |
| Spindle Thread | N/A |
| Charging Time | 45 minutes - EY0L11B |
| Electric Brake | No |
| Ergonomic | Yes, Easily coverts from straight to pistol format |
| Extra Battery Included | No |
| Battery | EY9221B |
| Gear lock mechanism for manual tightening | |
Click here to view the Panasonic Power Tool Full Line Catalogue
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
