Panasonic Dual Voltage Rotary Hammer Drill & Driver - Skin Only

• Dual Function - Combining the functions of SDS-Plus Rotary Hammer and Drill Driver in one compact unit

• Air System Hammer - The rotary hammer drill & driver offers high speed concrete drilling using the air type cup pison method.

• Five Torque Levels - The torque levels can be adjusted according to the hardness of the material of the type of material being drilled, approximately from 1.5 to 5.4Nm (1.0N.m per stage, total 5 stage).

• Dual Voltage (14.4V or 18V
) - Offers powerful performance with either a 14.4V or 18V battery. A special dual voltage circuit detects the voltage of the attached battery pack and controls the current and voltage flows to the tool to ensure optimum performance.

• High speed concrete drilling by air type (Cup piston method) hammer

• Variable speed control / reversible


• Compact body

• Slow start switch for accurate drilling with a clean finish

• SDS-plus bit system up to 16mm diameter

• LED light to support work


• Dust and water resistant level IP56

• Voltage: Dual 14.4V or 18V

• Chuck Type / Drive: SDS-Plus

• Overheat Protection System: Yes

• Clutch Stages: 5 plus drill

• Clutch Torque: 1.5 - 5.4 (1.0 per stage)

• Speed - No Load (rpm): 0 - 1,250rpm (High/Hard Mode) (Rotation only)

• Blows per Minute: 0 - 4,750bpm (High/Hard Mode) (Rotation with hammering)

• Electric Brake: Yes

• LED Light: Yes

• Product has an IP Protection Rating: IP56

• Dimension (L x W x H): 249mm x 264mm x 64mm

• Weight: 2.45kg

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.