Milwaukee M18 FUEL™ 10 Piece Power Pack 10C4 M18FPP10C4603B

The M18 FUEL™ 13mm Hammer Drill Driver delivers the capability to drill large holes at high speed into the densest materials. The cordless drill is a compact design and solution, featuring AutoStop™ Control Mode for Enhanced Safety. The POWERSTATE™ Brushless motor delivers the most power under load to complete 2-9/16" Self-Feed holes in dense woods for increased productivity. At only 175mm in length, it provides maximum access and maneuverability in tight spaces. The AutoStop™ Control Mode offers enhanced safety for the operator by preventing over-rotation in a bind-up. The REDLINK PLUS™ intelligence ensures maximum performance and protection from overloads, heating, and over-discharge whilst the all metal ratcheting chuck provides increased grip strength, durability, and corrosion resistance.

The M18 FUEL™ 1/4" Hex Impact Driver features the POWERSTATE™ Brushless motor which delivers maximum power for a full range of capabilities to complete the widest variety of applications. Increase productivity on the jobsite with fast driving speed without sacrificing power or control. REDLINK PLUS™ intelligence delivers Ultimate Trigger Control by providing smooth acceleration for small fasteners to prevent stripping of screws or damaging of materials. Featuring 4-mode drive control provides users with greater control over output speed and power. Self-Tapping Screw Mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking, and stripping out screws. The new impact driver also features Tri-LED lighting, illuminating the area of work while eliminating shadows.

The M18™ Pivoting Area Light offers maximum versatility and mounting capabilities in any jobsite condition. This area light has a strong 75mm (3”) multi-material clamp that is designed for 25 -75 mm outer diameter pipes and steel studs. For metal mounting, this flood light has a strong magnetic base for quick attachment. With 355° of horizontal rotation and 170° of vertical rotation for complete light head adjustability, it is easier than ever to get light where it is needed. The M18™ Pivoting Area Light delivers 2,000 lumens of TRUEVIEW™ High-Definition Output and offers 6 hours of runtime on high with an M18™ REDLITHIUM™ 5.0Ah Battery. Designed with the jobsite in mind this light is impact resistant, being able to withstand up to a 2.7m drop, and is backed with a 5-Year Tool, Limited Lifetime LED Warranty.

The MILWAUKEE M18 FUEL HACKZALL is the fastest cutting and most powerful one-handed reciprocating saw. Utilising a POWERSTATE Brushless Motor and a best in class 22mm stroke length, the M18 FUEL HACKZALL cuts up faster. The compact, one-handed design provides superior control and the ability to make cuts in tight spaces. The dual gear counter balance mechanism provides lower vibration than traditional reciprocating saws, resulting in faster cut-starts in metal and reduced user fatigue. REDLINK PLUS Intelligence ensures optimised performance and protects your investment from overload, overheating, and over-discharge. The M18 REDLITHIUM™ 5.0Ah Battery Pack provides more work per charge and more work over the life of the pack than competitive batteries. A rubber seal and weep holes provide superior protection against water and debris.

The M18™ Compact Blower delivers fast jobsite cleanup for maximum productivity. The M18BBL offers optimal power to size ratio. The M18™ Compact Blower has power control that includes a 3-speed electronic switch, lock-on and a variable speed trigger which allows for versatile clearing power. The Compact Blower moves air at 257 kph and 2.8 m3/min to keep users productive. Featuring a shock-absorbing polymer body and a crush-resistant nozzle the M18™ Compact Blower delivers jobsite durability. Included is a 230 mm nozzle extension to clear dust and debris easily from the ground, overhead or tight spaces. The M18BBL also comes with a universal inflator/deflator attachment suitable for most inflatable products, and the blower works with all M18™ REDLITHIUM™ Batteries.

The M18 FUEL™ 125mm (5") Angle Grinder with Deadman Paddle Switch is the next advancement in power and performance, fast cutting and a lighter and more compact design when compared to the current model. The POWERSTATE™ Brushless Motor delivers maximum sustained power and 8,500 RPM to remove material faster and increase productivity. REDLINK™ PLUS Intelligence ensures unmatched levels of performance, protection, and compatibility. The M18 FUEL™ 125 mm (5") Angle Grinder with Deadman Paddle Switch includes an electronic clutch for kickback protection, as well as overload protection to maximise motor life. With tool-free accessory and guard adjustments, users will experience fast accessory changes, and less downtime, while remaining fully compatible with the most common accessories in the market. The MILWAUKEE® M18 FUEL™ 125mm (5") Angle Grinder with Deadman Paddle Switch takes cordless grinders to the next level.

The M18 FUEL™ 1/2" Compact Impact Wrench with Friction Ring delivers maximum access in tight spaces, up to 339 Nm of nut-busting torque, and maximum workspace visibility. This battery-powered impact wrench measures only 124.5 mm in length, with a POWERSTATE™ Brushless Motor to provide the power to remove stubborn fasteners, even in confined spaces. The MILWAUKEE® 1/2" Compact Impact Wrench with Friction Ring has tri-LEDs that surround the anvil to deliver the user brighter light with fewer shadows. 4-Mode DRIVE CONTROL offers enhanced precision with a range of pre-set RPM and IPM levels, selectable from a single button on the tool. By selecting Mode 4, Auto Shut-Off Mode applies no more than 27 Nm of torque for hand-tight fastening applications to prevent overtightening. Mode 4 also features Bolt Removal Mode, where the tool delivers full torque output, then decreases RPMs once the bolt is loosened to prevent fastener drops. REDLINK™ PLUS Intelligence electronics make these controls possible while ensuring maximum performance, protecting the tool against overloads, over-heating, and over-discharge. The M18™ REDLITHIUM™ battery pack (not included) fits all M18™ tools, delivering more work per charge and more work over the life of the pack.

The M18 7.5L Wet/Dry Vacuum offers powerful suction for wet and dry applications. Compatible on all MILWAUKEE M18 REDLITHIUM™ battery packs, the M18WDV-0 offers long continuous run time and high air power and suction to provide quick and easy removal of dust, debris and water. A HEPA filter delivers excellent fine dust collection for dry applications. The stackable toolbox design, on-board hose and accessory storage offer excellent portability and convenience, a built-in blower port allows the vacuum to double as a blower, and the 31.8mm inlet allows standard vacuum attachments to be fastened. It includes vacuum, filter, hose, a crevice tool, hose clip adapter and a wide nozzle.

M18 FUEL™ 165mm Circular Saw is designed for the professional carpenter, remodeler, and general contractors who rely on high-performing and durable tools. The POWERSTATE™ Brushless Motor spins the blade at 6,000 RPM, maintaining high speed under load, providing users the ability to complete their most demanding applications efficiently. The REDLINK PLUS™ Electronics ensures maximum tool performance and protection from overload, overheating, and over-discharge. When paired with an M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0Ah Battery this saw delivers 300 cuts per charge and is fully compatible with all M18™ REDLITHIUM™ batteries. The lightweight, ergonomic design paired with a robust belt hook allows for increased portability and makes it the perfect solution for completing difficult-to-access cuts. Positive bevel detents and new-to-world depth detents offer added productivity and reduce downtime. Additionally, the saw has an electric blade break, LED work light, rafter hook, and all magnesium guards and shoes, keeping the user productive and providing the durability to handle the toughest job site conditions.

The MILWAUKEE® M18 FUEL™ Multi-Tool generates fast cuts, the power for demolition, and low full tool vibration. The POWERSTATE™ Brushless Motor delivers 10,000 to 20,000 OPM, with an aggressive 4.2° oscillation angle to deliver fast cuts. The Multi-Tool also gives users the power to complete many demanding applications with ease, such as large cuts through hardwoods and nail embedded wood, removing grout, or tackling other jobs. Vibration dampening technology delivers low full tool vibration, letting the user make cuts more comfortably, and with less fatigue. REDLINK™ PLUS Intelligence ensures optimal levels of performance, protection, and compatibility between the tool and battery. To allow users to adjust speed to suit the application, the M18 FUEL™ Multi-Tool features a 10-setting Variable Speed Dial, with an additional Auto-Load feature. Auto-Load sees the tool start slowly when making precise cuts, before automatically ramping up to the highest speed once under load. Tool-free blade change makes accessory changes quick and means no misplaced tools and less downtime on the jobsite. An integrated 180° LED light provides users maximum visibility in low-light situations.

The M18™ REDLITHIUM™ HIGH OUTPUT™ 6.0Ah Battery provides 50% more power and runs 50% cooler than M18™ REDLITHIUM™ 9.0Ah battery packs. The optimised combination of size and increased power provides a great solution for the entire range of M18™ products. It runs substantially cooler through heavy applications, allowing tradesmen to push their cordless tools harder and longer than ever before.

Features

• Versatility: Powers more than 250+ MILWAUKEE® M18™ cordless power tools.

• REDLINK™ intelligence. Provides optimised performance and over load protection.

• Best in class construction. Offers long lasting performance and durability.

• Fuel gauge on board.

Specifications

• Platform: M18™

• Voltage: 18V

• Battery Type: HIGH OUTPUT™

• Amps: 6.0Ah

• Weight: 1.27kg

• Warranty - Battery/Charger: 2 Years

The M12 & M18 Rapid Charger charges packs up to 40% faster, reducing downtime and maximising productivity. The charger accepts all M12 and M18 batteries, providing an upgrade for both systems. Featuring REDLINK Intelligence, it communicates directly with the battery to monitor cell voltage, temperature, and charge status to optimise the performance and extend the life of the pack. As an added level of communication, the charger indicates when the battery reaches an 80% charge, providing confidence that a substantial amount of work can be completed without waiting for a full charge.