Milwaukee M12 FUEL 1/2" Stubby Impact Wrench with Friction Ring (Tool Only)
Overview
Our new 1/2” Stubby Impact Wrench delivers maximum power, in a lightweight compact body and delivering 50% faster application speeds when compared to the previous generation. Leveraging POWERSTATE™ Brushless Motor, The M12 FUEL™ Stubby Delivers 0-3,000 RPM with up to 746 Nm of Nut Busting Torque, allowing the removal of corroded and stubborn applications. Our solution delivers on performance and size, at only 0.99 Kg for the bare tool. Users can expect less fatigue throughout their work week while fitting into tight spaces and allowing access where larger impacts can't fit without using additional accessories or disassembling components to reach the desired fastener. Equipped with Tri LED work lights to illuminate your work area without the frustration of shadows. A 4-Mode DRIVE CONTROL™ allows for greater precision. Featuring an AUTO SHUT-OFF™ mode that applies no more than 20 Nm of torque for hand-tight applications that prevent overtightening when in forward. In reverse, Bolt Removal Mode will slow down the RPM once the bolt is free to prevent bolts from flying around your work area. To change the modes, it is a single-handed operation. By shifting the forward-reverse shuttle into neutral and double-tapping the trigger, you will be able to change modes effortlessly.
Features
-
Delivers up to 746 Nm of Nut-Busting torque and up to 542 Nm of fastening torque in a total tool length of 124mm.
-
Designed to deliver improved performance in tight access application fastening and loosening tasks.
-
Single handed mode change capabilities delivers increased productivity.
-
4-Mode DRIVE CONTROL™ provides greater control over output speed and power. Includes auto shut-off and bolt-removal mode
-
Auto shut-off mode prevents over tightening and increases productivity by applying no more than 20 Nm of torque.
-
New Tri-LED shadowless lighting delivers high-definition visibility in tight access workspaces.
-
Increased performance, lighter weight, and more compact when compared to M18FIW2F12 paired with a M18B5 battery.
-
New Battery Isolation System for secured battery connection and reduced vibration transmitted to the pack
Specifications
-
Platform: M12 FUEL™
-
Anvil Type: 1/2" Square with Friction Ring
-
Nut Busting Torque: 746 Nm
-
Fastening Torque: 542 Nm
-
IPM: 0 - 1,500 / 0 - 3,000 / 0 - 3,300 / 0 - 3,300
-
No Load RPM: 0 - 930 / 0 - 2,100 / 0 - 3,000 / 0 - 1,300
-
Drive Control: 4 Mode with Auto Shut-Off Mode & Bolt Removal Mode
-
Length: 124mm
-
Weight: 0.99kg
-
Warranty - Tool: 5 Years
-
Tri-LED: Yes
Milwaukee M12 FUEL 3/8" High Speed Extended Reach Ratchet (Tool Only)
Overview
The M12 FUEL™ 3/8" High Speed Extended Reach Ratchet is the latest addition to Milwaukee's battery-powered ratchets. The M12 FUEL™ ratchets provide fast cordless speed with a slim head profile and an extended neck that will provide more access in tight spaces. Simultaneously, the recessed forward-reverse shift knob allows users to easily switch between tightening or loosening fasteners. The 3/8" Ratchet provides performance of up to 47.5 Nm max torque, the same torque output as the M12 FUEL™ High Speed Ratchets. The High-Speed Extended Reach Ratchets feature an Investment Cast Steel Yoke housing and a POWERSTATE™ Brushless Motor that delivers great durability. The cordless ratchet features built-in REDLIINK™ tool technology to help users reduce fatigue and increase productivity.
Features
-
Delivers 450 RPM under load.
-
Extended reach and small head size paired with compact yoke housing allows for easier access in tight spaces.
-
Recessed forward-reverse shift knob allows users to easily shift between fastening and tightening task without reducing access capabilities.
-
Higher speed increases productivity and reduces user fatigue by minimising time spent handling tool in tight spaces.
-
Up to 47.5 Nm of maximum torque output.
Specifications
Milwaukee 3/8" Drive 10 Piece Standard Metric Socket Set with Storage Rail
Overview
Our 3/8" drive socket sets with dedicated storage rails have been designed from the ground up to be part of the most versatile socket family. MILWAUKEE® sockets feature an innovative design with FOUR FLAT™ parallel flat sides which deter rolling on surfaces and are wrench-compatible. The socket sizes are stamped into the flats providing you with improved, easy-to-read visibility, while the fastener attachment face has optimised geometry to increase torque and reduce bolt rounding. Our dedicated storage rails offers a simple and convenient way to store your sockets.
Features
-
FOUR FLAT™ sides that are wrench-read and anti-roll
-
Stamped sizes on sides for extra visibility
-
Optimised geometry to increase torque and prevent rounding
-
Dedicated storage rail
-
6 Point Socket
Specifications
Milwaukee REDLITHIUM USB Rechargeable Pocket Flood Light 3.0AH Kit
Overview
STICK IT. WEAR IT. CARRY IT. Powered by REDLITHIUM USB, the MILWAUKEE USB Rechargeable Pocket Flood Light delivers 445 lumens of TRUEVIEW High Definition output, and is capable of all-day runtime, over 2,000 recharges and 3X faster charging via USB. Stick, clip, and carry it anywhere with its dual magnet clip, perfect for mechanical, electrical, H/VAC-R, MRO, and automotive trades. The light is impact and chemical resistant to withstand harsh environments. With two light output modes, users can maximise brightness or extend runtime with up to 11 hours of light on a single charge. The REDLITHIUM USB Battery can be recharged in the light via Micro USB or swapped out with additional REDLITHIUM USB Batteries for virtually no downtime. The MILWAUKEE USB Rechargeable Pocket Flood Light is covered by a limited lifetime warranty.
Features
-
Upgrade from 2.0Ah battery to 3.0Ah battery included in kit
-
Two modes, up to 445 lumens of TRUEVIEW™ High Definition Output
-
Up to 12 hours runtime when used with REDLITHIUM™ USB 3.0Ah Battery Pack
-
IP54 (limited dust ingress and high-pressure water jets from any direction)
-
Magnetic base and clip for convenient storage and hands-free use
Specifications
-
Platform: REDLITHIUM™ USB
-
Voltage: 4V
-
Runtime: 2.5 Hours (High) | 12.5 Hours (Low) - L4B3
-
Lumens: 445 (High) | 100 (Low)
-
Kit: Yes
-
IP Ratings: IP54
-
Warranty: Limited Lifetime
Milwaukee M12 REDLITHIUM High Output 2.5Ah Compact Battery
Overview
The M12™ REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power and runs 25% cooler than the M12™ REDLITHIUM™ 2.0Ah Compact Battery. This increased performance of the lithium-ion battery gives you the same power and runtime of an M12™ REDLITHIUM™ battery in a lighter and more compact package. The 12-volt battery pack runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Its compact, lightweight design allows you to work in tight workspaces and reduces fatigue. Each battery pack is durably built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the M12™ REDLITHIUM™ HIGH OUTPUT™ 2.5Ah is built with a resistant housing, providing increased protection against exposure to common oils, greases, and solvents found in automotive and manufacturing environments. The M12™ REDLITHIUM™ HIGH OUTPUT™ 2.5Ah battery is fully compatible with Milwaukee M12™ solutions.
Features
-
M12™ REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery runs up to 25% cooler vs M12B2
-
Increased thermal protection is optimised for high draw tools ensuring batteries don’t overheat even in the toughest applications
-
REDLINK™ intelligence provides optimised performance and overload protection
-
M12™REDLITHIUM™ HIGH OUTPUT™ 2.5Ah Compact Battery delivers 25% more power vs M12B2
Specifications
Milwaukee REDLITHIUM High Output 5.0AH Battery
Overview
The M12™ REDLITHIUM™ HIGH OUTPUT™ 5.0Ah Battery delivers 25% more power and runs 25% cooler than the M12™ REDLITHIUM™ 4.0Ah Battery. The increase in power elevates the performance of the entire M12™ system and drives the next breakthrough in M12 FUEL™. The lithium-ion battery runs substantially cooler through demanding applications, allowing you to push your cordless power tools throughout a wide range of applications. Each battery pack is built for heavy-duty use, runs cooler, and performs in climates below -18°C. In addition, the M12™ REDLITHIUM™ HIGH OUTPUT™ 5.0Ah Battery is built with a resistant housing, increasing the protection against exposure to common oils, greases, and solvents found in transportation maintenance and manufacturing environments. The M12™ REDLITHIUM™ HIGH OUTPUT™ 5.0Ah battery is fully compatible with Milwaukee M12™ solutions.
Features
-
M12™ REDLITHIUM™ HIGH OUTPUT™ 5.0Ah Battery runs up to 25% cooler vs M12B4
-
Increased thermal protection is optimised for high draw tools ensuring batteries don’t overheat even in the toughest applications
-
REDLINK™ intelligence. Provides optimised performance and overload protection
-
M12™ REDLITHIUM™ HIGH OUTPUT™ 5.0Ah Battery delivers 25% more power vs M12B4
Specifications
Milwaukee M12 Lithium-Ion Battery Charger
Overview
Quickly charges all M12 batteries. Power up your M12 REDLITHIUM™ in less than an hour with the M12 Lithium-Ion Charger. It communicates directly with the battery pack to manage charges and features an easy-to-load design. The charger’s slim profile requires little bench-top room, while the pass-through plug conserves valuable outlet space. Monitor battery charges for all of your M12 cordless tools with the onboard indicator light.
Features
-
Single unit simplicity: Charges all M12™ Batteries
-
Charge management: Charger communicates with the battery pack to ensure a full charge and battery protection
-
Onboard indicator light: Provides the status of the battery
Specifications
Discover the Milwaukee M12 FUEL™ 3 Piece Power Pack 3D2 at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
