Image for Illustrative Purposes Only
MicroCare No-Clean Flux Remover- VeriClean MCC-DC1 10 oz. Aerosol
SKU: MCC-DC1
MCC-DC1
DESCRIPTION
Data Sheet
Shipping & Delivery
MicroCare No-Clean Flux Remover- VeriClean MCC-DC1 10 oz. Aerosol
This product is, hands-down, the industry's best no clean flux remover for removing residues from soldering fluxes and pastes, which is why it has been the best-selling flux remover at MicroCare for more than a decade.
10oz. Aerosol
MicroCare No-Clean Flux Remover- VeriClean MCC-DC1 Key Benefits-
Your very best choice for cleaning no clean fluxes and pastes
-
Versatile cleaning "” very good on light oils, grease and many adhesives
-
Amazing ability to dissolve and remove silicone conformal coatings, silicone oils and silicone adhesives quickly and safely
-
No residues / no rinsing
-
Plastic-safe
-
The aerosol packages are TriggerGrip™ cleaning system compatible
-
Now also available in the super-convenient, pocket-sized cleaning pen (photo, below)
-
Now also available in the economical, money-saving, jumbo-sized aerosol for an even lower cost-per-clean
A versatile solvent, it also is an excellent degreaser and often is used on other types of fluxes and pastes, organic residues, ionics, silicone-based conformal coatings, adhesives, grease and oils. It's a versatile stencil cleaner, adhesive remover and general precision cleaner. It is ideal for cleaning thru-hole and SMT designs, getting under BGA chips, and rinsing residues from connectors. Even though this is primarily used as a no clean flux remover it also dissolves even fully-cured silicone conformal coatings and swells silicone tubing. It dries briskly, has very little aroma, leaves no residues, is non-corrosive and ESD-safe. VeriClean™ is safe on all common components and materials. It's also very safe for people because it's based on ingredients used in cosmetics. The fluid is VOC exempt. Ozone-safe. Very low global warming factor (GWP). Flammable. TriggerGrip™ compatible. StatZAP™ compatible.
MicroCare No-Clean Flux Remover- VeriClean MCC-DC1 Technical Data|
Appearance |
Clear, colorless liquid |
|
Odor |
Slight, Etheral |
|
PEL (ppm, 8-hr TWA) |
50 |
|
Boiling Point |
98 °C / 210 °F |
|
Chemical Family |
Methyl Siloxanes |
|
F-Gas Compliant |
|
|
Evaporation Rate |
Fast |
|
Cleaning Strength (Kb) |
18 |
|
Active Ingredients |
Methyl Siloxanes |
|
Flashpoint |
-4ËšC / 24ËšF |
|
Global Warming Rating (100yr) |
<1 |
|
VOC Organic Content (g/L) |
87 |
|
Ozone Impact (O.D.P.) |
Zero |
|
REACH & ELINCS Compliant |
|
|
RoHS and WEEE Compliant |
|
|
Safety Rating |
Flammable |
|
Specific Gravity |
0.77 |
|
Vapor Pressure @ 20 ºC |
5.95 |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
