Image for Illustrative Purposes Only
MicroCare Lead-Free Flux Remover-PowerClean MCC-PW210A 10.5 oz. Aerosol
SKU: MCC-PW210A
MCC-PW210A
DESCRIPTION
Shipping & Delivery
MicroCare Lead-Free Flux Remover-PowerClean MCC-PW210A 10.5 oz. Aerosol
This is the world's strongest lead free flux remover and PCB (printed circuit board) cleaner. It is engineered specifically for the hard-to-clean lead-free solders and fluxes. This product also can work very well as a fast-drying degreaser. Importantly, this cleaner also is the least-expensive product in its class (nonflammable, fast-drying circuit cleaners).
One unique feature of this product is that it prevents white residues on lead-free electronics. This cleaner is used for defluxing, degreasing, cleaning connectors, removing light oxides and cleaning flux-covered pallets. It easily flushes away lead-free residues, oils, inks and acrylic conformal coatings without the problems of white residues. It is the best choice for cleaning during rework and repair because the cleaning is fast, the drying is even faster, the aroma is low, and little elbow-grease is required. PowerClean™ is generally safe on most components, but testing on soft plastics is recommended. PowerClean is not suitable for use in heated cleaning systems. Ozone-safe. Medium GWP. Contains VOCs. Nonflammable. Low aroma. TriggerGrip™ compatible. StatZAP™ compatible.
10.5 oz. Aerosol
Features and Benefits-
Strong defluxing of high temperature lead-free flux residues
-
Cleans oils, inks and some conformal coatings
-
Eliminates white residues
-
No residue/no rinsing
-
Nonflammable and fast-drying
-
Removes acrylic conformal coatings
-
TriggerGrip™ cleaning system compatible
Appearance |
Clear, colorless liquid |
Odor |
Slight, Etheral |
PEL (ppm, 8-hr TWA) |
200 |
Boiling Point |
39 °C / 102 °F |
Chemical Family |
HFC Blend |
Evaporation Rate |
Fast |
Cleaning Strength (Kb) |
115 |
Active Ingredients |
Hydrofluorocarbons and trans |
Flashpoint |
None |
Global Warming Rating (100yr) |
Medium |
VOC Organic Content (g/L) |
640 |
Ozone Impact (O.D.P.) |
Zero |
Vapor Density |
Not available |
REACH & ELINCS Compliant |
|
RoHS and WEEE Compliant |
|
Safety Rating |
Non-Flammable |
Specific Gravity |
1.27 |
Surface Tension |
Not available |
Vapor Density |
|
Viscosity |
Not available |
Vapor Pressure @ 20 ºC |
55.3 |
Discover the MicroCare Lead-Free Flux Remover-PowerClean MCC-PW210A 10.5 oz. Aerosol at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.