Image for Illustrative Purposes Only
MG Chemicals Tip Tinner 96.3% Tin 0.7% Copper & 3% Silver Lead Free 28g
SKU: MG4910-28G
4910-28G
DESCRIPTION
Features
Specifications
Resources
Shipping & Delivery
MG Chemicals Tip Tinner 96.3% Tin 0.7% Copper & 3% Silver Lead Free 28g
4910 Soldering Tip Tinner is a lead-free mixture used to quickly clean, repair and maintain solder iron tips. It is composed of SAC305 powder mixed with thermally stable, oxide-reducing compounds to form a convenient tinning block. This re-tinning compound is suitable for both leaded and lead-free applications.
During use, a soldering iron tip can lose its protective layer of tin, leading to oxidization. Oxidized tips exhibit poor heat transfer characteristics and lose their ability to accept solder. This leads to bad joint formation, which prematurely damages the soldering iron tip. To extend the soldering tips lifespan and decrease solder joint failure, all de-tinned tips should be re-tinned as soon as possible. 4910 Tip Tinner re-tins better than standard rosin-cored wire and results in a more robust, oxide-protective tin layer.
4910 Tip Tinner also provides better cleaning than pads or wet sponges. Carbonized resin can be removed by simply wiping the soldering tip against the re-tinning compound, eliminating the need for heavy pressure or mechanical scrubbing.
Discover the MG Chemicals Tip Tinner 96.3% Tin 0.7% Copper & 3% Silver Lead Free 28g at Mektronics Australia – your trusted source for quality tools and equipment!
-
Lead-free Sn96.6/Ag3/Cu0.5 alloy
-
Suitable for both lead and lead-free tip repairs
-
Safe for both workers and the environment
-
Minimal fume production
-
Minimal residue
-
Non-corrosive
-
Easy to use
-
Halogen-free
-
Color: Silver white
-
Alloy Density @ 26°C: 7.5 g/cm3
-
Hardness: 15 HB
-
Melting Point, solidus: 217 °C
-
Melting Point, liquidus: 221 °C
-
Tip Temperature Upper Limit: <450 °C
-
Thermal Conductivity: 58 W/(m∙K)
-
Shelf Life: 10 years
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
