Image for Illustrative Purposes Only
MG Chemicals Structural Epoxy Adhesive 45ml
SKU: MG9200-50ML
9200-50ML
DESCRIPTION
Features & Benefits
Specifications
Resources
Shipping & Delivery
MG Chemicals Structural Epoxy Adhesive 45ml
Structural Epoxy Adhesive 9201 is a 2-part structural adhesive designed to create long-lasting load-bearing joints. It adheres strongly to metals, plus a wide range of materials that are difficult to bond to, including glass, ceramics, wood, engineered thermoplastics, and thermoset laminates, such as SMC (sheet molding compound) and GRP (glass-reinforced plastics). It evenly distributes stress throughout the entire bonded area and is especially useful for joining dissimilar materials that will experience thermal cycling stresses.
This structural epoxy adhesive creates tough vibration-resistant bonds, making it an ideal auto body panel adhesive. It is the best glue for aluminum and works well when used as an automotive structural adhesive or automotive panel adhesive.
9200 provides excellent electrical insulation, and protects against static discharge, thermal shock, galvanic corrosion, environmental humidity, salt water, fungus, and many harsh chemicals. It is smooth, non-sagging and thixotropic, so it is excellent for use on vertical surfaces and for gap filling.
It is also useful for potting electronics in enclosures with gaps where a non-thixotropic encapsulant would flow through. 9200 is viscous, yet flowable enough to be dispensed from a syringe. The 50ml size may be used with a mixing tip when dispensing with a caulking gun or pressurized system.
For a flame retardant version, use 9200FR. For a 1-part adhesive, use 9310. We also offer electrically conductive and thermally conductive adhesives.
Discover the MG Chemicals Structural Epoxy Adhesive 45ml at Mektronics Australia – your trusted source for quality tools and equipment!
-
1:1 mix ratio
-
Working time: 30 min
-
Cure time: 48 hrs at room temperature or 1.5 hrs at 65 °C (149 °F)
-
Excellent bond strength to a wide variety of substrates
-
Extreme resistance to vibration and temperature cycling
-
Superior tensile, compressive and lap shear strength
-
Excellent chemical resistance
-
Excellent electrical insulating characteristics
-
Non-sagging and gap-filling
-
Ideal for bonding dissimilar materials
-
Low shrinkage
-
RoHS 3 compliant
-
Breakdown Voltage 41 500 V
-
Dielectric Strength 503 V/mil
-
Resistivity 2.5 x 1013 Ω·cm
-
Hardness 76 D
-
Tensile Strength 16 N/mm2
-
Compressive Strength 64 N/mm2
-
Lap Shear (stainless steel) 20 N/mm2, (aluminum) 22 N/mm2
-
Glass Transition Temperature (Tg) 44 ˚C
-
CTE Prior Tg 95 ppm/˚C
-
CTE After Tg 215 ppm/˚C
-
Thermal Conductivity @ 25 ˚C 0.3 W/(m·K)
-
Service Temperature Range -40–150 ˚C
-
Packaging: Dual cartridge
-
Net Volume: 45ml
-
Net weight: 56.3g
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
