MG Chemicals Silver Conductive Epoxy Adhesive 6ml 2 Syringe Kit

• Extreme electrical conductivity

• Convenient 1 to 1 mix ratio

• Working time: 20 minutes

• Cure time: 6 hours at room temperature or 10 minutes at 65 °C (149 °F)

• Creates strong permanent electrical connections

• Cures at room temperature

• SVHC free

• Excellent adhesion to many substrates

• Room temperature storage

• Long shelf life

• Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons

• Resistivity 5.3 x 10-4 Ω·cm

• Hardness 84 D

• Tensile Strength 8.3 N/mm2

• Compressive Strength 75 N/mm2

• Lap Shear  (stainless steel) 3.6 N/mm2 (aluminum) 2.6 N/mm2

• Glass Transition Temperature (Tg) 40 ˚C

• CTE Prior Tg 63 ppm/˚C

• CTE After Tg 363 ppm/˚C

• Thermal Conductivity @ 25 ˚C 2 W/(m·K)

• Service Temperature Range -50–150 ˚C

• Working Time 20 min

• Service Cure 65 min @ 22 ˚C

• Mix Ratio by Volume 1:1

• Mix Ratio by Weight 1.1:1

• Mixed Density 3.22 g/mL

• Shelf Life 3 y

• Viscosity @ 25 ˚C (A) 698 Pa·s (B) Thixotropic

• Net Volume: 6ml

• Net Weight: 19.4g

• Packaging: 2 Syringe Kit

Technical Data Sheet

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.