Image for Illustrative Purposes Only
MG Chemicals Sac305, 0.81mm Dia, 96.3% Tin, 0.7% Copper and 3% Silver, Lead Free, 112g
SKU: MG4900-112G
4900-112G
About
Shipping & Delivery
MG Chemicals Sac305, 0.81mm Dia, 96.3% Tin, 0.7% Copper and 3% Silver, Lead Free, 112g
MG Chemicals Sac305, 96.3% Tin, 0.7% Copper and 3% Silver, Lead Free, 0.81Mm/0.032" Dia, 112g Overview
The 4900–4917 SAC305 No Clean Solder Wire is an electronic grade solder wire. It uses the predominant lead-free alloy composition and exceeds J-STD-006C and meets ASTM B 32 purity specifications. It is complemented with a no clean, synthetically refined, splatter-proof resin flux core that is classified as REL0 according to J-STD-004B. This solder is a great alternative to leaded solders.
The 4900–4917 solders achieve a consistent solder and flux percentage through a state-of-the-art, extrusion, wire-drawing machine. This machine continually monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire.
MG Chemicals Sac305, 96.3% Tin, 0.7% Copper and 3% Silver, Lead Free, 0.81Mm/0.032" Dia, 112g Features
- Lead free & no clean
- Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
- Flux meets J-STD-004B
- The resin spreads like rosin-activated flux
- Virtually non-splattering
- Non-corrosive residues
- Non-conductive residues
- Halide free
- About 14% longer by weight than leaded solder wires
- Suitable for Use in Food Facilities as a Non-Food Chemical—Canadian and NFS recognition letters available on request
- Compliance:
- Dobb-Frank (DRC conflict free)
- REACH (compliant)
- RoHS (compliant)
Discover the MG Chemicals Sac305, 0.81mm Dia, 96.3% Tin, 0.7% Copper and 3% Silver, Lead Free, 112g at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
