Image for Illustrative Purposes Only
MG Chemicals One-Part Epoxy Potting Compound 300ml
SKU: MG9510-300ML
9510-300ML
DESCRIPTION
Features & Benefits
Specifications
Resources
Shipping & Delivery
MG Chemicals One-Part Epoxy Potting Compound 300ml
One-Part Epoxy Potting Compound 9510 is a black, rigid, one-part epoxy potting compound. It is a heat cure epoxy that provides unlimited working time at room temperature and does not require frozen storage.
Our 1-part epoxy resin provides an exceptional chemical resistance against a wide variety of mild to harsh chemicals, including toluene, acetone and ethyl acetate. It also provides excellent electrical insulation and protects against static discharge, vibration, thermal shock, environmental humidity, salt water, fungus, and many harsh chemicals.
This 1-part epoxy has a low viscosity and can easily penetrate small gaps and cavities. 9510 can be readily used in manual, pneumatic and robotic dispensing processes.
For general purpose black 2-part epoxies, consider MG’s 832B and 832HD. We also offer flexible, thermal and high temperature epoxy potting compounds.
Our 2-part flame-retardant epoxy potting compounds are 834B, 834HTC and 834FX.
We also offer polyurethane and silicone potting compounds. 12 month shelf life at room temperature
Discover the MG Chemicals One-Part Epoxy Potting Compound 300ml at Mektronics Australia – your trusted source for quality tools and equipment!
-
Minimum cure temperature of 80 °C [176 °F]
-
Ready to dispense—no mixing is required
-
Low viscosity of 4 800 cP
-
Excellent chemical resistance
-
Broad service temperature of-65 to 150 °C [-85 to 302 °F]
-
Excellent adhesion to a wide variety of substrates, including metals, composites, glass, ceramics, and many plastics
-
Extremely high tensile and compressive strength
-
Excellent electrical insulating characteristics
-
Extreme resistance to water and humidity (allows for submersion where needed)
-
Solvent-free
-
Resistivity 2.6 x 1013 Ω·cm
-
Breakdown Voltage 36 700 V
-
Dielectric Strength 540 V/mil
-
Hardness 84 D
-
Tensile Strength 20 N/mm2
-
Compressive Strength 90 N/mm2
-
Lap Shear (stainless steel) 9.2 N/mm2
-
(aluminum) 5.8 N/mm2
-
Glass Transition Temperature (Tg) 70 ˚C
-
CTE Prior Tg 74 ppm/˚C
-
CTE After Tg 217 ppm/˚C
-
Thermal Conductivity @ 25 ˚C 0.3 W/(m·K)
-
Service Temperature Range -65–150 ˚C
-
Intermittent Temperature 295 ˚C
-
Net Volume: 300ml
-
Net Weight: 336g
-
Packaging: Cartridge
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
