Image for Illustrative Purposes Only
MG Chemicals Fast Set Epoxy 46ml 2 Cartridge Kit
SKU: MG8332-50ML
8332-50ML
DESCRIPTION
Features & Benefits
Specifications
Resources
Shipping & Delivery
MG Chemicals Fast Set Epoxy 46ml 2 Cartridge Kit
Fast Set Epoxy is a 2-part, 1 to 1 epoxy adhesive with a five-minute working time. Bonded parts need only be held together for eight to ten minutes before they are sufficiently set for handling. This quick set epoxy offers excellent adhesion to a wide range of materials that are difficult to bond with, including glass, fiberglass, concrete, ceramics, china, tile, wood, and most metals and plastics.
This quick set epoxy resin is a strong adhesive glue suitable for household, industrial and manufacturing applications. It can be used for gap filling, surface repairs, and laminating.
It is available in convenient 25ML and 50ML dual cartridges, and is suitable for both manual and automated dispensing applications.
For standard adhesives, use 9200 and 9200FR. For a 1-part adhesive, use 9310. We also offer electrically conductive and thermally conductive adhesives.
Discover the MG Chemicals Fast Set Epoxy 46ml 2 Cartridge Kit at Mektronics Australia – your trusted source for quality tools and equipment!
-
Quick set epoxy glue
-
Set time: 8 to 10 minutes
-
Cure time: 5 hours at room temperature or 15 minutes at 65 °C
-
1:1 mix ratio
-
Tensile strength of 5 000 psi
-
Low shrinkage
-
Provides strong electrical insulation
-
Protects against thermal and mechanical shocks
-
Strong resistance to humidity, salt water, acids, bases, and aliphatic hydrocarbons
-
Breakdown Voltage: 23 200 V
-
Dielectric Strength: 250 V/mil
-
Resistivity: 1.7 x 1014 Ω·cm
-
Hardness: 82 D
-
Tensile Strength: 34 N/mm2
-
Compressive Strength: 63 N/mm2
-
Lap Shear (stainless steel) 4.9 N/mm2, (aluminum) 5.9 N/mm2
-
Glass Transition Temperature: (Tg) 64 ˚C
-
CTE Prior Tg: 76 ppm/˚C
-
CTE After Tg: 175 ppm/˚C
-
Service Temperature Range: -40–150 ˚C
-
Net Weight: 79.3g
-
Net Volume: 46ml
-
Packaging: 2 Cartridge Kit
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
