Image for Illustrative Purposes Only
Metcal MFR-1150 Single Output Desolder System with Venturi Workstand
SKU: METMFR-1150
MFR-1150
DESCRIPTION
Shipping & Delivery
Metcal MFR-1150 Single Output Desolder System with Venturi Workstand
The MFR-1100 Single Output Series is highly versatile in that it can be used with either a soldering tip, cartridge, tweezers or desoldering hand-piece. The MFR-1150 comes with one desoldering hand-piece and a venturi workstand.
Features and Benefits
-
Venturi workstand
-
Provides shop air option for all MFR series
-
Compatible for use with all MFR systems
-
Uses existing DxP desolder cartridges and replaceable coil assembly (MFR-HDCA)
-
Small Bench Top foot print
-
SmartHeat ® Technology provides exceptional power for high thermal demand applications
-
MFR-PS1100 MFR Single Output Power Supply
-
MFR-H5-DS Desoldering Hand-piece for the MFR Series
-
MFR-WSDSX Desoldering Workstand with venturi compatible with MFR-H5- DS Hand-piece
-
MFR-FTKIT Fittings and air hose kit
-
AC-TC Desoldering Tip Cleaner
NOTE: No tip/cartridge included
Tips / Cartridges Series compatible with this system
- DxP Desoldering Cartridges
| Power Supply | |
|
Input Line Voltage: |
100 - 240 VAC |
|
Input Line Frequency: |
50/60 HZ |
|
Power Consumption: |
65 Watts maximum |
|
Output Power: |
60 Watts maximum |
|
Output Frequency: |
450 KHz |
|
Dimensions (approx.) W x D x H: |
90mm (3.5") x 200mm (8") x 152.5mm (6") |
|
Weight: |
2.3kg (5.05 lbs) |
|
Idle Tip Temperature Stability: |
+/- 1.1 °C (2 °F) in still air |
|
Ambient Operating Temperature: |
10 - 40 °C (50 °F - 104 °F) |
|
Maximum Enclosure Temperature: |
55 °C (131 °F) |
|
Tip to ground Potential: |
<2 Ohms |
|
Surface resistivity: |
105 - 109 Ohm |
|
Approvals cTUVus |
CE |
| MFR-H5-DS Desolder Hand-piece | |
|
Power Cord (3-wire): |
183 cm 18/3 SJT |
|
Solder Hand-piece cable length: |
152 cm (60"), burn proof, ESD safe |
|
Hand piece connector: |
8 pin power connector |
| MFR-WSDSX Workstand | |
|
Input Voltage: |
24V |
|
Input Power: |
15W |
|
Workstand dimensions: |
100mm x 200mm x 140mm (4" x 8" x 5.5") |
|
Noise Level: |
< 55 dB |
|
Recommended Air Pressure: |
550kPa (80 PSI) - Shop air only |
|
Vacuum suction force: |
0.85 bar (25" Hg) |
Discover the Metcal MFR-1150 Single Output Desolder System with Venturi Workstand at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
