Image for Illustrative Purposes Only
Metcal Power Supply MFR Switched Internal Pump MFR-PS1300
SKU: METMFR-PS1300
MFR-PS1300
DESCRIPTION
Features
Contents
Specifications
Shipping & Delivery
Metcal Power Supply MFR Switched Internal Pump MFR-PS1300
The MFR-1300 Series Desoldering and Rework Systems are standalone equipment. The power supply features an internal pump providing 0.7 bar pressure and 60 watts of SmartHeat® Technology that makes through-hole desoldering easy and keeps your products safe from board damage.
The handpiece has been designed to be used in two configurations. As standard, the MFR-H5-DS desolder tool is a pencil grip design and a clip-on grip enables the handpiece to be used in a pistol style. The solder collection chamber has a large capacity and the innovative replaceable tips enable reduced downtime and quicker changeover. Since the system has two switchable ports it can be used in addition to a soldering tip, cartridge, or tweezer handpiece.
Discover the Metcal Power Supply MFR Switched Internal Pump MFR-PS1300 at Mektronics Australia – your trusted source for quality tools and equipment!
-
SmartHeat® Technology provides exceptional power for high thermal demand applications
-
Single or Dual simultaneous outputs allow for single/dual hand-piece use
-
Five hand-pieces available for increased application solutions for soldering
-
Desoldering (upgrade kit MX-UK5) and rework on one system
-
Each hand-piece has a comprehensive range of cartridges or tips for maximum flexibility
-
Ergonomic handpieces for operator safety and comfort
- MFR-PS1300
| Input Line Voltage: | 100 - 240 VAC, grounded circuit, 50/60 Hz |
| Rated Power Consumption: | 110 W max. |
| Output Power: | Variable, 60 W max.* |
| Output Frequency: | 450 KHz |
| Heating Method: | Induction, smartHeatR |
| Power Supply Dim. W x D x H: | 170 x 200 x 152.5 mm (6.7" x 7.9" x 6") |
| Power Supply Weight: | 3.9 kg (8.6 lb) |
| Certification / Marking: | cTUVus, CE |
| Tip-to- Ground Potential: | < 2 mV |
| Tip-to-Ground Resistance: | < 2 Ohm |
| Ground Detection: | Permanent |
| Surface Resistivity: | 105 - 109 Ohm |
| Idle Temperature Stability: | 1.1 °C ( 2 °F) in still air |
| Tip Temperature Accuracy: | Meets or exceeds IPC J-STD-001 Standard |
| Vacuum Suction Force | 0.7 bar (21" Hg at Vacuum pump) |
| Noise Level | < 55 dB |
| Power Cord Length: | 183 cm, 18/3 SJT |
| Warranty: | 1 year |
| Ambient Operating Temp: | 10 - 40 °C (50 - 104 °F) |
| Max. Enclosure Temp: | 55 °C (131 °F) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
