Image for Illustrative Purposes Only
Metcal Basic Dispenser 0-6.9 Bar (100 psi) DX-250
SKU: METDX-250
DX-250
DESCRIPTION
Features
Contents
Specifications
Shipping & Delivery
Metcal Basic Dispenser 0-6.9 Bar (100 psi) DX-250
The DX-250/255 series controllers are economical, highly precise and repeatable. They are equipped with a digital timer and an continuously adjustable vacum suck-back, to prevent dripping of low-viscosity media and high viscosiy media from pulling threads. A RS-232 interface enables connection to a PLC. The dispensing system is available in two versions: Working pressure adjustable from 0 - 6.9 bar for common applications (DX-250). Working pressure adjustable via precision valve from 0 - 1 bar for low-viscosity media (DX-255).
PLEASE NOTE: The TSD800-6 Air Filter (not included) must be installed with the dispenser to ensure proper air filtration. Please remember to purchase a TSD800-6 Air Filter together with the dispenser.
Discover the Metcal Basic Dispenser 0-6.9 Bar (100 psi) DX-250 at Mektronics Australia – your trusted source for quality tools and equipment!
-
Small footprint and lightweight Economical dispenser
-
Highly accurate and repeatablemicro-air dispensing
-
Digital timer and vacuum controls
-
Available in two versions of operating pressure: 0 to 100 psi for general applications, and 0 to 15 psi for specific low viscosity applications
-
Packaged ready to use with: universal power supply, foot switch, air hose, sample tips, syringe barrels & adapter
-
O Interface for robotic applications
-
Foot Switch
-
Power Supply
-
Sample Tip Kit
-
10cc Receiver Head Kit
-
Mounting Brackets
-
Receiver Head Air Hose Holder
-
Syringe Barrel Stand
| Input Voltage: | 100 - 240 VAC, 50/60 Hz |
| Operating Pressure: | 0 - 6.9 bar (0 - 100 psi) |
| Cycle Rate: | 600 cyle/minute |
| Timing Range: | 0.020 - 60 seconds |
| Vacuum Suck-Back Control: | Steplessly variable |
| Timing Tolerances: | +/- 0.001 % |
| Cycle Mode: | TIMED, PURGE |
| Dispensing DOT counter: | Yes |
| I/O Interface: | Initiated by voltage or contact closure |
| Certification: | CE, TUV-GS, NRTL |
| Size (W x L x H): | 152 x 165 x 1787mm (6" x 6.5" x 7") |
| Weight: | 1.2 kg ( 2.6 lb) |
| Warranty: | 1 year |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
