Makita DLX6102X1 6 Piece Combo Kit

Makita DHP458Z 18V Li-Ion Cordless Hammer Drill Driver - Skin Only

Features

• All metal gear construction - Extra-high transmission durability

• Belt clip and bit holder

• Battery fuel gauge

• Single sleeve key less chuck allows for easy bit installation/removal by one hand

• Torque setting ring - Wider torque range of 1-10 NM in clutch mode allows for versatile applications

Specifications

• Capacity:

• Steel: 13mm

• Wood: 76mm

• Masonry: 16mm

• Impacts per minute:

• High: 0-30,000ipm

• Low: 0-6,000ipm

• No load speed:

• High: 0-2,000rpm

• Low: 0-400rpm

• Max. fastening torque:

• Hard: 91NM

• Soft: 58NM

• Dimension (L x W x H): 225mm x 79mm x 259mm

• Weight: 2.3kg

Makita DTD152Z 18V Li-ion Cordless Impact Driver - Skin Only

The new Makita DTD152Z is a compact 18V Impact Driver to replace its predecessor DTD146Z. Comparing the two models, the DTD152Z is more compact in size, lightweight and features high rotation speed. The DTD152Z is designed to suit the needs of carpenters, plumbers, electricians and kitchen fitters for applications such as tightening or drilling screws.

Features

• Aluminium hammer case – hammer casing has been designed to be light weight and robust

• One touch installation – driving shank has been designed so that the collar does not have to be pulled back when installing a new bit, only when removing the bit

• LED job light – twin LED job light with pre glow and afterglow functions

• Compact design – unit design has been reduced to 137mm

• Ergonomic design – the grip has been designed to provide comfortable grip and more control while minimising hand fatigue

• XPT eXtreme Protection Technology – significantly increasing the protection

Specifications

• Voltage: 18V

• Driving shank: 6.35mm

• Impacts per minute: 0-3500rpm

• No load speed: 0-2900rpm

• Max tightening torque: 165Nm

• Weight: 1.5kg

Makita DGA452Z 18V Li-Ion Cordless 115mm (4-1/2") Angle Grinder - Skin Only

Features

• Cordless convenience for grinding & cutting applications

• Small circumference motor housing with soft grip for enhanced comfort and control

• Electronic current limiter protects the motor from overload

• Warning lamp turns on to warn of impending overload and also warns of low battery

• Anti-restart function for safety Motor will not start if charged battery is inserted with switch on

Specifications

• Voltage: 18V

• Max. capacities:

• Depressed centre wheel: 115mm

• Cut-off disc: 115mm

• Sanding disc: 115mm

• Diamond wheel: 115mm

• No load speed: 10000rpm

• Length: 317mm

• Spindle thread: M14 x2

• Weight: 1.5kg

Makita DSS611Z 18V LXT Li-Ion Cordless 165mm (6-1/2") Circular Saw - Skin Only

Features

• Ergonomic light weight design

• Aluminum diecast base plate

• Bevel cuts up to 50º

• Easy-to-operate large lock-off lever

• Ergonomically designed handle with soft grip

Specifications

• No Load speed: 3700 RPM

• Max output: 360W

• overall length: 347mm

• Max Cutting Capacities: 

• 0°: 57mm

• 45°: 40mm

• 50°: 36mm

• Weight: 3.2kg

Makita DJR186Z 18V Li-Ion Cordless Reciprocating Saw - Skin Only

Features

• Newly designed crank mechanism that provides an increased stroke length and minimizes vibration transferred to the user

• Designed to suit the needs of carpenters, plumbers, electricians and trades people that require a powerful tool to cut material such as timber, metal and pvc

• Tool-less blade change - just simply insert the blade for installation. Removal can be done with a single action, no need to touch the blade!

• Electric brake - Quickly and efficiently slows the blade so the user can resume operation

• 2-Finger Trigger - Allows the user to comfortably pull the trigger even when the saw is being used for upside down cutting

• XPT eXtreme Protection Technology - increased resistance to dust and small amounts of water

Specifications

• Voltage: 18V

• Capacities:

• Wood: 255mm

• Pipe Diameter: 130mm

• Length of Stroke: 32mm

• Strokes Per Minute: 0-2,800spm

• Length: 486mm

• Weight: 3.8kg

Warranty

• 3 Years Warranty covered by Makita Australia

Makita DML815 18V Li-ion LXT Cordless LED Torch - Skin Only

The Makita 18V LED Torch Skin, DML815, provides great illumination in a compact size, with four 0.5W LEDs providing a brightness of 160lm, making it great for illuminating tight spaces on the jobsite. Designed with convenience in mind with a head that swivels from 0 –170°, as well as an ergonomically designed handle with rubberized soft grip providing increased comfort to the user.

Features

• High-luminance 4 L.E.D. flashlight provides 160 lumens

• 12 position pivoting flashlight head with positive stops from 60º - 170º

• Metal hang hook is convenient and job site durable

• Multi-faceted reflector controls the direction and spread of the light

• L.E.D. and provides a sharp, round spotlight

• Compact and ergonomic design

• Rubberized soft grip provides increased comfort on the job

• An ideal addition to any toolbox or workshop

Specifications

• Voltage: 18V

• Lumens: 160

• Bulb: 4 LED

• Length: 368mm

• Weight: 0.3kg

Warranty

• 3 Years Warranty Covered By Makita Australia

Makita DC18RC 18V Li-Ion Cordless Battery Fast Charger

Features

• Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method

• Forced air cooling fan - cools the battery to minimise charging time

• Digital power display identifies the condition of the battery and charging condition

Specifications

• Voltage: 18V

• Cell capacity: 1.5Ah - 6.0Ah

• Charge Time: 

• 1.5Ah: 15mins

• 3.0Ah: 22mins

• 4.0Ah: 36mins

• 5.0Ah: 45mins

• 6.0Ah: 55mins

• Length: 185mm

• Weight: 0.82kg

Warranty

• 2 Years Warranty Covered By Makita Australia

Makita BL1830B-L 18V 3.0Ah Li-ion Cordless Battery with Gauge

The Makita 18V LXT Li-ion 3.0Ah battery, BL1830B-L, charges faster and works longer than standard Li-ion batteries, giving you and your cordless tools unmatched performance and productivity to take on the most demanding applications.

The BL1830B-L features an impressive rapid charge time of 22 minutes, Star Protection Technology protecting the battery from Overload, Over-discharge and Over-heating.  As well as the multi contact slide terminal ensuring stable contact with the tool even when under extreme vibration.

Features

• Integrated L.E.D. battery charge level indicator allows user to monitor battery charge

• Fast 22 minute charging time

• Battery delivers consistent power and run time in extreme temperatures, even in winter (-20°C)

• Impact-resistant outer case and shock-absorbing inner-liner are engineered to protect the battery

• Sixteen contact terminals maintain a constant connection with the tool to help prevent power loss or fluctuation, even during high-vibration applications

• Battery resists self-discharge and remains ready for use even after long periods of storage

• Sensitive electronics are protected with a thick gel coating, preventing damage against dust and moisture

• Star protection computer controls - includes overload protection, over-discharge protection and over heat protection

• The battery and tool communicate, protecting your tool and battery from overload by cutting power when put under abnormally high current draw

• If the battery reaches a certain level of heat it will cut power to the tool, protecting the tool and battery from overheating

Specifications

• Voltage: 18V

• Amp hour: 3.0Ah

• Cell type: Lithium-Ion

• Charging time: 60 minutes

• Weight: 0.6kg

Warranty

• 2 Years Warranty covered by Makita Australia

Makita 831279-0 Heavy Duty LXT 660mm Wheel Trolley Duffel Tool Bag

Features

• Suitable to hold 4 different LXT tools depending on size of tool

• Multiple Interior and Exterior pockets for tools and accessories

• Rugged Ballistic Nylon construction

• Includes Velcro Exterior pockets and Zipped Pockets

• Adjustable Bungie cord on top for added storage

• Ridged bottom w/ rails for stability

• Padded bag walls for tool protection

• Includes shoulder carry strap and metal clasp

Specifications

• Dimensions (L x W x H): 660mm x 310mm x 300mm

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.