Lessmann Steel Cup & Wheel Set, 1/4" Shank

• Number of rows: 1

• Trim width: 7mm

• Stocking Height: 12mm

• Trim Material: STA

• Trim Material Diameter: 0.20mm

• Trim Material Shape: Wavy

• Brush Diameter: 50mm

• Pipe Diameter: 10mm

• RPM Max.: 15000

• Shaft Diameter: 6mm

• Shaft Length: 30mm

DIY Wheel Brush with 6mm Shank Dia 75 x 8mm Steel Wire STA 0.25mm

Overview

DIY round brush with 75mm diameter, 6mm diameter shaft and steel wire trim.

The round brush is used for removing rust, paint, etc., cleaning welds and light deburring work. The brush can be clamped into hand sanders or flexible shafts. The steel trim is suitable for processing steel surfaces. With the DIY brushes, LESSMANN offers an impressive selection of inexpensive alternatives to the professional tools from LESSMANN. The maximum RPM is 4500. The high quality “Made in Germany” is often used in crafts and DIY.

Specifications

• Number of rows: 1

• Trim Width: 8mm

• Stocking Height: 14.5mm

• Trimming Material: STA

• Trim Material Diameter: 0.25mm

• Trim Material Shape: Wavy

• Brush Diameter: 75mm

• Pipe Diameter: 20mm

• RPM Max: 4500

• Shank Diameter: 6mm

• Shaft Length: 27mm

DIY Wheel Brush with 6mm Shank Dia 100 x 10mm Steel Wire STA 0.25mm

Overview

DIY round brush with 100mm diameter, 6mm diameter shaft and steel wire trim.

The round brush is used for removing rust, paint, etc., cleaning welds and light deburring work. The brush can be clamped into hand sanders or flexible shafts. The steel trim is suitable for processing steel surfaces. With the DIY brushes, LESSMANN offers an impressive selection of inexpensive alternatives to the professional tools from LESSMANN. The maximum RPM is 4500. The high quality “Made in Germany” is often used in crafts and DIY.

• Number of rows: 1

• Trim Width: 10mm

• Stocking Height: 22.5mm

• Trimming Material: STA

• Trim Material Diameter: 0.25mm

• Trim Material Shape: Wavy

• Brush Diameter: 100mm

• Pipe Diameter: 20mm

• RPM Max: 4500

• Shank Diameter: 6mm

• Shaft Length: 27mm

End Brush 23mm Diameter Shaft with 6mm Diameter Steel Wire STA Crimped 0.30mm

Overview

Brush with 23 mm diameter, shaft with 6 mm diameter and steel wire trim.

The brush is clamped into hand grinders or flexible shafts. It is used for working on hard-to-reach places, for cleaning corners, recesses and holes. It is also used for cleaning molds/cast parts and for removing paint and rubber residue. The steel bristles are suitable for steel surfaces. The aggressiveness is medium. With its permanently mounted 6 mm shaft, the brush is suitable for professional use and fast-rotating tools. The high-quality "Made in Germany" quality is often used in metalworking industries and craft companies, car repair shops, staircase, railing and container builders.

Specifications

• Stocking Height: 25mm

• Trim Material Diameter: 0.30mm

• Brush Diameter: 23mm

• RPM Max: 18000

• Shaft Length: 16mm

• Trimming Material: STA

• Trim Material Form: Wavy

• Brush Total Length: 68mm

• Sleeve Diameter: 22.5mm

• Shaft Diameter: 6mm

DIY Surface Brush 6mm Shank Dia 75mm Steel Wire STA Crimped 0.35mm

Overview

DIY surface brush with 75 mm diameter, shaft with 6 mm diameter and steel wire trim.

The surface brush is clamped into hand grinders or flexible shafts. It is used for removing rust, paint and dirt and light deburring work. The steel bristles are suitable for working on steel surfaces. With the DIY brushes, LESSMANN offers an impressive selection of inexpensive alternatives to LESSMANN's professional tools. The maximum RPM is 4500. The high-quality "Made in Germany" quality is often used in handicrafts and DIY.

• Number of rows: 1

• Trimming Material: STA

• Trim Material Form: Wavy

• Pipe Diameter: 26mm

• Shaft Diameter: 6mm

• Stocking Height: 22mm

• Trim Material Diameter: 0.30mm

• Brush Diamter: 75mm

• RPM Max. 4500

• Shaft Length: 27mm

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.