Image for Illustrative Purposes Only
Knipex VDE Snipe Nose Side Cutting Pliers 200mm
SKU: KNI2616200
26 16 200
DESCRIPTION
Features
Specifications
Shipping & Delivery
Knipex VDE Snipe Nose Side Cutting Pliers 200mm
The Knipex 26 16 200 is primarily used by electricians carrying out installation, wire feeding and assembly work and who also want a professional cutting function on the pliers. The cutting edges of the pliers are shaped to produce a bite type cut. The cutting edges are additionally induction hardened to approx. 61 HRC so that the pliers can even be used to cut hard wire.
The precision tips made of vanadium electric steel are elastic and stable when twisted. This allows the manual force deployed using these pliers to be well measured, which is a particular benefit with delicate components. The needle nose pliers can also be used for powerful gripping and holding – and for cutting. Thanks to the position of the cutting edges near the joint which is advantageous for the transmission of force, good cutting capacities are achieved. Medium-hard wire can be cut up to Ø 3.2 mm and hard wire up to Ø 2.2 mm.
In the control cabinet, on a machine, on an electric motor, when feeding and connecting wire to terminals, in junction boxes, in control cabinet construction: the VDE tested Knipex 26 16 200 is in its element wherever space is tight. The qualities of the snipe nose side cutting pliers from Knipex will be immediately apparent when lines and wires need to be held, fed and cut. The quality chrome plating offers good protection against dirt and corrosion. This corrosion resistance makes special sense when the pliers are kept permanently in the service vehicle, where they may be exposed to condensation caused by temperature changes.
Discover the Knipex VDE Snipe Nose Side Cutting Pliers 200mm at Mektronics Australia – your trusted source for quality tools and equipment!
-
Elastic tips: dimensionally stable even when twisted
-
Distortion-tolerant, elastic precision tips
-
Half-round, long, tapered jaws
-
With cutting edges for soft, medium-hard and hard wire
-
Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC
-
Straight jaws
-
Vanadium electric steel, forged, multi stage oil-hardened
-
Multi-component grips
-
Surface: chrome-plated / zinc-plated / nickel-plated
-
Article No: 26 16 200
-
EAN: 4003773022831
-
Pliers: chrome-plated
-
Head: chrome-plated
-
Handles: insulated with multi-component grips, VDE-tested
-
Weight: 206 g
-
Dimensions: 200 x 56 x 19 mm
-
Standard: DIN ISO 5745 DIN EN 60900 IEC 60900
-
REACH compliant: does not contain SVHC
-
RoHS compliant: not applicable
-
Cutting capacities medium hard wire (diameter): Ø 3.2 mm
-
Cutting capacities hard wire (diameter): Ø 2.2 mm
-
Jaw thickness (joint) (T1): 9.5 mm
-
Tips width (W4): 3.0 mm
-
Tips thickness (T2): 2.5 mm
-
Jaw length (L3): 73.0 mm
-
Head width (W3): 18 mm
-
VDE tested: yes
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
