Image for Illustrative Purposes Only
JBC FAE1-2K1D Fume Extractor Kit 1WB 230V
SKU: JBC-FAE1-2K1D
FAE1-2K1D
DESCRIPTION
Contents
Specifications
Shipping & Delivery
JBC FAE1-2K1D Fume Extractor Kit 1WB 230V
FAE is the most effective solution to avoid exposure to solder fumes. Fume extraction starts up when the tool is lifted from the stand, operating only when soldering. This function saves power and extends filter life.
Each arm offers 80 m³/h aspiration, optimizing fume extraction for two workbenches. It surpasses industry standards, ensuring higher air quality and compliance.
It includes:
-
FAE1100 Filter (FAE1110 Pre-filter + HEPA H13 + Carbon). This three-layered system achieves a certified efficiency of 99.95% in filtering soldering fumes, meeting EN 1822 standards.
-
FAE010 - a flexible extraction hose which connects FAE1 to FAE022 or FAE072 Flexible Arms.
-
FAE072 - a completely flexible arm to be fixed to your workbench by a clamp.
-
P405 allowing you to activate the vacuum system without connection to a JBC Station.
Discover the JBC FAE1-2K1D Fume Extractor Kit 1WB 230V at Mektronics Australia – your trusted source for quality tools and equipment!
-
Instruction Manual
-
P405 Pedal
-
FAE1100 Filter with HEPA H13 for FAE1
-
FAE1 Fume Extractor with FAE1100 for 1 Workbench
-
FAE010 Flexible Hose
-
FAE072 Flexible Arm with Clamp
-
Blower type: Brushless
-
Max. flow rate: 230m3/h (135 CFM)
-
Max. vacuum: 3.2 kPa (0.46 psi) - 100 V / 4.3 kPa (0.62 psi) - 120 V / 6 KPa (0.87 psi) - 230 V
-
Work areas: 1 or 2
-
Noise Level: 55 dB @ 1m
-
ESD safe: Meet ANSI/ESD S20.20
-
Pre-filter: Medium Dust Filter M5 (EN 779)
-
Compact filters: HEPA filter H13 (EN 1822) and Active Carbon filter
-
Connections: USB-B / Pedal connector / Station connectors RJ12 (4x)
- Input power: 200W. Fuse 4A - 100 V / 270W. Fuse 4A - 120 V / 300W. Fuse 2.5A - 230 V
Weight and dimensions
-
Unit: 380 x 340 x 475 mm / 13.90 kg
- Package: 620 x 460 x 715 mm / 20.42 kg
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
