Image for Illustrative Purposes Only
JBC Logo

JBC FAE2-5B Fume Extractor




Out of Stock: Available to Order

own it from $10 a week with Group 2 Copy Created with Sketch.

Shipping & Delivery

JBC FAE2-5B Fume Extractor

  • FAE is the most effective solution to avoid exposure to solder fumes. The extractor activates and operates only when soldering.

  • The extractor starts up only when soldering. This function not only saves power, but also extends the life span of the equipment, including the filter.

  • FAE2 stand has an integrated vacuum system that detects when the tool is at rest and automatically absorbs excess fumes.

  • It can be controlled via JBC Stations, a pedal, a robotic system or a PC.

  • It has 3 predefined levels of aspiration: low, medium and high. It also features a custom mode where the airflow can be set within the minimum (10%) and maximum rates (100%).

Discover the JBC FAE2-5B Fume Extractor at Mektronics Australia – your trusted source for quality tools and equipment!

  • Aspiration flow rate: Low / Medium / High / Custom

  • Operation modes: Automatic (JBC Stations), Continuous, Pedal

  • Blower type: Brushless

  • Max. flow rate: 290m3/h (170.7 CFM)

  • Max. vacuum: 6.1 KPa (0.88 psi)

  • Work areas: 2

  • Noise Level: 54 dB @ 1m

  • Pre-filter: Medium dust filter M5 (EN 779)

  • Compact filters: H13 particle filter (EN 1822) + activated carbon filter

  • ESD Safe


  • USB-B: Firmware update

  • RJ12 Connector: Direct connection for 4 stations

  • Pedal: Up to 2 tools control

Power Supply

  • Peak Power: 400 W (120V-230V), 320 W (120V)

  • Operating Temp Rate: 10 to 40 ºC / 50 to 104 ºF


  • Unit: 560 x 320 x 590mm / 33.60kg

  • Package: 725 x 485 x 760mm / 36.00kg


A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.


All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.