Image for Illustrative Purposes Only
JBC B·IRON DUAL 500 Dual Battery-Powered Soldering Station
SKU: JBC-BISS-5A
BISS-5A
DESCRIPTION
Contents
Specifications
Shipping & Delivery
JBC B·IRON DUAL 500 Dual Battery-Powered Soldering Station
B·IRON DUAL 500 is specially designed for continuous work in mass production.
It performs up to 500 SMD soldering joints per charge.
This station converts into a dual-tool station by adding an extra tool. Both tools can be controlled in real time.
Inclusions:
-
B·500 Handle (x2), which is fully compatible with C210 Cartridge Range. It also has a power safe mode that can be activated by putting on the cap.
-
Charging-Base for charging booth tools automatically when placed in Tool Holder.
-
It also features Quick Cartridge Exchanger, enabling a safe and easy cartridge change, Tip Cleaner with Brass Wool and Antisplash Membrane.
-
PDS Portable Display 7" with B·IRON app to configure and control the system.
Discover the JBC B·IRON DUAL 500 Dual Battery-Powered Soldering Station at Mektronics Australia – your trusted source for quality tools and equipment!
-
Instruction Manual
-
2 x B·500 Handle for B·IRON
-
2 x C210001 Conical Cartridge Ø 0.3
-
1 x PDS Portable Display 7" for B·IRON
-
2 x B1596 Safety Cap for B·IRON Handles
CHARGING BASE
-
Input voltage: 100 V - 240 V 50/60 Hz
-
Power: 40 W
-
Tool output: 12 V / 1000 mA
-
USB output: 5 V / 1000 mA
TOOL
-
Output peak power: 24 W
-
Battery: Li-Ion 7.4V / 750 mAh
-
Charge time: 60 minutes
-
Selectable temperature: 100 to 450ºC / 210 to 840ºF
-
Idle temp. stability (still air): ±1.5 °C / ±3 °F
-
Temperature accuracy: ± 3% (Using reference cartridge)
-
Connections: Bluetooth Low Energy (BLE)
-
Ambient Operating Temp: 10 - 50 °C / 50 - 122 °F
-
Tool Weight: 75 g / 0.165 lb
WEIGHTS & DIMENSIONS
-
2.126 kg (4.69 lb)
-
2.738 kg (6.04 lb)
-
265 x 223 x 160mm
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
