Image for Illustrative Purposes Only
Hikoki 36V Brushless 12.7mm (1/2") IP56 Impact Wrench - Skin Only
SKU: HIKWR36DE(H4Z)
WR36DE(H4Z)
DESCRIPTION
Specifications
Shipping & Delivery
Hikoki 36V Brushless 12.7mm (1/2") IP56 Impact Wrench - Skin Only
-
Efficient brushless motor
-
Powerful tightening & loosening torque
-
Compact at 169mm in length
-
IP56 dust & water resistant
NOTE: TOOL ONLY - BATTERY & CHARGER NOT INCLUDED
Discover the Hikoki 36V Brushless 12.7mm (1/2") IP56 Impact Wrench - Skin Only at Mektronics Australia – your trusted source for quality tools and equipment!
| Capacity | Ordinary bolt | M10-M24 (3/8" to 1") |
| High-strength bolt | M10-M20 (3/8" to 3/4") | |
| Tightening torque*¹ | 770Nm | |
| Nut busting torque*² | 1,050Nm | |
| Tip condition | 12.7 mm (1/2”) square drive | |
| No-load rotation speed | 4 | 0 to 2,400 min-¹ |
| 3 | 0 to 2,100 min-¹ | |
| 2 | 0 to 1,800 min-¹ | |
| 1 | 0 to 1,500 min-¹ | |
| Impact rate | 4 | 0 to 3,400 min-¹ |
| 3 | 0 to 3,000 min-¹ | |
| 2 | 0 to 2,600 min-¹ | |
| 1 | 0 to 2,200 min-¹ | |
| LED light | White LED (SW interlocked) | |
| Type of switch | Trigger switch with forward/reverse changeover lever (with brake) | |
| Weight | 1.9kg (without battery) | |
| Dimensions (L x H ) | 169 x 242mm | |
| *¹: This torque is measured when tightening an M24 high-strength bolt (strength rating: 10.9) for 10 seconds with a hexagonal socket. *²: This torque is measured when loosening an M27 high-strength bolt (strength rating :F10T) with a hexagonal socket. |
||
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
