Image for Illustrative Purposes Only
Hikoki 2Pce 18V Brushless Slide Impact Driver Drill / Impact Driver Combo Kit
SKU: HIKKC18DBSL(HAZ)
KC18DBDL(HRZ)
DESCRIPTION
Inclusions
Shipping & Delivery
Hikoki 2Pce 18V Brushless Slide Impact Driver Drill / Impact Driver Combo Kit
18V Brushless Slide Impact Driver Drill
Overview
-
Powerful brushless motor
-
High speed performance
-
Compact and lightweight
-
2 speed mode (Low/High)
-
Easy access clutch dial
-
Spindle lock function
-
LED light
Specifications
|
Type of power |
18V |
||
|
Type of motor |
Brushless |
||
|
Capacity |
Driving screw |
Machine |
6mm |
|
Wood |
8mm dia x 100mm (with prepared holes) |
||
|
Drilling |
1.6mm Steel |
13mm |
|
|
1.6mm Aluminium |
13mm |
||
|
18mm Wood |
50mm |
||
|
Drill chuck capacity |
Mount type |
Screw on (UNF 1/2" to 20) |
|
|
Diameter |
1.5-13mm |
||
|
No load speed |
Low |
0-400 (min-¹) |
|
|
High |
0-1,800 (min-¹) |
||
|
Max. impact rate |
Low |
6000 (min-¹) |
|
|
High |
27,000 (min-¹) |
||
|
Max. torque |
Soft |
40Nm |
|
|
Hard |
70Nm |
||
|
Slip torque |
22 positions 1.0-4.5Nm |
||
|
Weight |
1.7kg |
||
|
Dimensions (L x W x H ) |
184 x 233 x 78mm |
||
18V Brushless Slide Impact Driver
Overview
-
Powerful brushless motor
-
High speed performance
-
Compact and lightweight
-
Variable speed trigger switch
-
Forward/reverse changeover lever with brake
-
LED light
Specifications
|
Type of power |
18V |
|
|
Type of motor |
Brushless |
|
|
Capacity |
Small screw |
4-8mm |
|
Standard bolt |
M5-M16 |
|
|
High strength bolt |
M5-M12 |
|
|
Tightening torque*¹ |
172Nm |
|
|
Tip condition |
6.35mm bit holder |
|
|
No load speed |
0-3,100 (min-¹) |
|
|
Impact rate |
0-3,400 (min-¹) |
|
|
Max. tightening torque |
172Nm |
|
|
Weight |
1.3kg |
|
|
Dimensions (L x H ) |
128 x 222 mm |
|
|
*¹: This torque is measured when tightening an M16 high strength bolt (strength rating 12.9) for 3 seconds with a hexagonal socket. |
||
Discover the Hikoki 2Pce 18V Brushless Slide Impact Driver Drill / Impact Driver Combo Kit at Mektronics Australia – your trusted source for quality tools and equipment!
-
1 x DV18DBSL 18V Brushless Slide Impact Driver Drill
-
1 x WH18DBSL 18V Brushless Impact Driver
-
2 x MultiVolt Battery (A) BSL36A18
-
1 x Rapid Charger UC18YSL3
-
1 x Carry Case
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
