Image for Illustrative Purposes Only
Hazet 1/2" (12.5mm) Square Solid Impact Wrench Extra Short 1100 Nm 9012M
SKU: HAZ9012M
9012M
DESCRIPTION
Specifications
Shipping & Delivery
Hazet 1/2" (12.5mm) Square Solid Impact Wrench Extra Short 1100 Nm 9012M
-
Maximum loosening torque: 1100 Nm
-
Extremely compact construction enables working in areas with restricted access
-
One-hand operation for right and left handed operators
-
Exhaust air is guided through the handle downwards
-
Reduced vibrations
-
Easy handling
-
Extra short – only 92 mm
-
Single hammer striking mechanism
-
Air connection inlet: Inside thread 12.91 mm (1/4″)
-
Coupler plug: Nominal size 7.2 (included)
-
Recommended torque: 610 Nm
-
Hose diameter (recommended): 10 mm
-
Working pressure (bar): 6.3
-
Sound power level: 108.1 db(A) Lp W
-
Vibration acceleration: 9.57 m/s2
-
Loosening torque (max) determined with screw size M: 16
-
Forward and reverse: three-stage (forward), single-stage (reverse)
-
Cold insulated handle
-
Output: Square, solid 12.5 mm (1/2 inch)
-
Net weight: 1.24 kg
-
Tightening torque max.: 678 Nm
-
Maximum loosening torque: 1100 Nm
-
Sound pressure level: 97.5 dB(A) Lp A
-
Revolutions per minute: 10000
-
Air requirement: 127 l/min (2.1 l/sec)
Discover the Hazet 1/2" (12.5mm) Square Solid Impact Wrench Extra Short 1100 Nm 9012M at Mektronics Australia – your trusted source for quality tools and equipment!
|
Loosening torque maximum |
1100 Nm |
|
Output |
1/2 inch (12.5 mm) square, solid |
|
Manual/impact operation |
For impact operation |
|
Tightening torque maximum |
678 Nm |
|
Net weight |
1.24 kg |
|
Striking mechanism (type) |
Single hammer striking mechanism |
|
Air requirement |
127 l/min |
|
Forward and reverse |
three-stage (forward), single-stage (reverse) |
|
Recommended torque |
610 Nm |
|
Handle |
Cold insulated handle |
|
Hose diameter (recommended) |
10 mm |
|
Vibration acceleration |
9.57 m/s2 |
|
Sound pressure level |
97.5 dB(A) Lp A |
|
Revolutions per minute |
10000 |
|
Thread type air inlet |
PT |
|
Air connection inlet |
Inside thread 12.91 mm (1/4″) |
|
Loosening torque (maximum) determined with screw size M |
16 M |
|
Coupler plug |
Nominal size 7.2 (included) |
|
Sound power level |
108.1 db(A) Lp W |
|
Air requirement [l/sec] |
2.1 l/sec |
|
Working pressure (bar) |
6.3 bar |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
