Image for Illustrative Purposes Only
Hazet 1/2" (12.5mm) Square Solid Impact Ratchet 9022SR-1
SKU: HAZ9022SR-1
9022SR-1
DESCRIPTION
Specifications
Shipping & Delivery
Hazet 1/2" (12.5mm) Square Solid Impact Ratchet 9022SR-1
-
High occupational safety thanks to reaction-free striking mechanism
-
Low-impact
-
High torque values – approx. 30% more than standard products
-
Rotation speed – approx. 3 x higher than standard products
-
Suitable for manual retightening with torque values → 270 Nm (competing products with only approx. 250 Nm)
-
Powerful pin clutch mechanism
-
Air connection inlet: Inside thread 12.91 mm (1/4″)
-
Coupler plug: Nominal size 7.2 (included)
-
Hose diameter (recommended): 10 mm
-
Working pressure (bar): 6.3
-
Sound power level: 98 db(A) Lp W
-
Vibration acceleration: 4.53 m/s2
-
Forward and reverse: single-stage (right/left)
-
Cold insulated handle
-
Output: Square, solid 12.5 mm (1/2 inch)
-
Dimensions / length: 280 mm
-
Net weight: 1.28 kg
-
Tightening torque max.: 102 Nm
-
Sound pressure level: 91 dB(A) Lp A
-
Revolutions per minute: 400
-
Air requirement: 113 l/min (1.9 l/sec)
Discover the Hazet 1/2" (12.5mm) Square Solid Impact Ratchet 9022SR-1 at Mektronics Australia – your trusted source for quality tools and equipment!
|
Manual/impact operation |
For impact operation |
|
Tightening torque maximum |
102 Nm |
|
Output |
1/2 inch (12.5 mm) square, solid |
|
Net weight |
1.28 kg |
|
Striking mechanism (type) |
Powerful pin clutch mechanism |
|
Air requirement |
113 l/min |
|
Forward and reverse |
single-stage (right/left) |
|
Dimensions |
280 mm |
|
Handle |
Cold insulated handle |
|
Hose diameter (recommended) |
10 mm |
|
Vibration acceleration |
4.53 m/s2 |
|
Length |
280 mm |
|
Sound pressure level |
91 dB(A) Lp A |
|
Revolutions per minute |
400 |
|
Air connection inlet |
Inside thread 12.91 mm (1/4″) |
|
Coupler plug |
Nominal size 7.2 (included) |
|
Sound power level |
98 db(A) Lp W |
|
Air requirement [l/sec] |
1.9 l/sec |
|
Working pressure (bar) |
6.3 bar |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
