Image for Illustrative Purposes Only
Hakko HFN1010 IoT Capable Soldering Station
SKU: HFN1010-43
HFN1010-43
DESCRIPTION
Features
Contents
Specifications
Shipping & Delivery
Hakko HFN1010 IoT Capable Soldering Station
-
Improve traceability
-
Minimize human error
-
Optimize soldering conditions
Discover the Hakko HFN1010 IoT Capable Soldering Station at Mektronics Australia – your trusted source for quality tools and equipment!
Enables human error-free temperature control and traceability of manual soldering process
-
FN-1010 and FG-100B equipped with communication function
-
Pioneer the future of soldering with advanced IoT technology
"Process control" and "Traceability" can be established through daily manual soldering operation
-
Optimization of soldering conditions is now possible based on a variety of information in daily soldering process collected by FN-1010
-
The following information can be collected by memory chip in T36 series tip and saved in a computer through a soldering station (Tip shape, Tip Serial number, Number of loads, Total time of power supplied, Load sensitivity, Type of solder alloy (Lead-Free / Lead), Count alarm)
Automatic calibration/off-set can be completed once measurement result is sent through infrared
-
Human error-free "tip temperature calibration " and "off-set" can be established through daily manual soldering process
-
Results of measurement/calibration/off-set can be recorded automatically
Options for IoT communication
Visualize energy supplied during soldering
-
It is now possible to visualize invisible energy supplied from T36 series tip during soldering. And that makes it possible to control factors of soldering, which were impossible before
Real-time work status on the LCD screen
Improved button operation
-
Quick access to "Preset temperatures" and "Off-set mode" with one push
-
It takes few button operation to access to most frequently used functions
Notification of alarm with sound and vibration: Alarm can be notified with vibration in a noisy environment
Free fall detection function
-
Built-in motion sensor detects free fall and cuts the power
-
It can prevent burning floor, a fire and other accident with the heat
Tip cleaner with solder ball preventive design
-
Solder ball during tip cleaning can be reduced by 99% with devised cleaner designs such as smaller aperture, and set angle as well as position
Tip replacement without heat resistant pad
-
Station
-
Handpiece (FN-1101)
-
Tip Cleaner (FT-401 with cleaning wire)
-
Power cord
-
Iron Holder (FH-210
-
Instruction Manual
|
Model No. |
FN-1010 |
|---|---|
|
Power consumption |
100W |
|
Temperature range |
50 to 450 ºC |
|
Temperature stability |
±3 ºC |
・Station
|
Output voltage |
AC 21V |
|---|---|
|
Dimensions |
104(W)×138(H)×152(D)mm |
|
Weight |
1.9kg |
・Soldering Iron
| Power consumption | 95W (21V) |
|---|---|
| Tip to ground resistance | <2Ω |
| Tip to ground potential | <2mV |
| Heating element | Composite heater |
| Cord length | 1.2m |
| Total length | 180mm (with 2.4D tip) |
| Weight | 32g (with 2.4D tip) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
