Image for Illustrative Purposes Only
Hakko FX-9702 N2 Soldering Iron to Suit FX971 / FX972
SKU: HFX9702-81
HFX9702-81
DESCRIPTION
Contents
Specifications
Shipping & Delivery
Hakko FX-9702 N2 Soldering Iron to Suit FX971 / FX972
-
N2 soldering iron
-
Compatible with FX-971, FX-972
- T39 series soldering tips are common to use with the FX-9701 and the FX-9702
Heated N2 gas products three effects:
1. Improving solderability
Soldering with N2 gas is effective for lead-free solder, which has poor wettability and spreadability. So, it reduces solder bridging from the components that get the bridge easily.
2. Preventing oxidation
Discharging heated N2 gas evenly from the top of the soldering tip and nozzle assembly, it prevents the components or the soldering tips from oxidation.
3. Preheating effect
Heated N2 gas assists soldering tip to heat workpiece effectively. Thus, it allows soldering at a lower temperature without reducing work efficiency.
NOTE:
-
TIPS & NOZZLES NOT INCLUDED - Compatible with T39 series
-
The FX-9702 N2 soldering iron cannot be used as a stand-alone unit. Please set it with the following stations. Soldering Station - FX-971 / FX-972, N2 Generator - FX-780 / FX-781, N2 Flowmeter - FX-791
Discover the Hakko FX-9702 N2 Soldering Iron to Suit FX971 / FX972 at Mektronics Australia – your trusted source for quality tools and equipment!
-
Handpiece (FX-9702)
-
Instruction Manual
NOTE: TIPS NOT INCLUDED
-
Power Consumption: 95W (24 V)
-
Temperature Range: 50 to 450℃
-
Tip to Ground Resistance: <2 Ω
-
Tip to Ground Potential: <2 mV
-
Heating Element: Composite heater
-
Cord length: 1.2m
-
Total Length: 227mm (with T39-D24 tip)
-
Weight: 49g (with T39-D24 tip and nozzle assembly D)
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
