Image for Illustrative Purposes Only
Hakko FR4003 Desoldering Gun for FR400-93
SKU: HFR4003-81
HFR4003-81
DESCRIPTION
Features
Specifications
Shipping & Delivery
Hakko FR4003 Desoldering Gun for FR400-93
Desoldering Gun for the FR-400 Desoldering Station. Now with a more efficient nozzle quick-change capability! Replaces the FR4001-81 Handpiece.
The Hakko FR-4003 Ultra Heavy Duty desoldering gun is specifically designed for difficult rework of extremely large mass components, such as high current inductor coils, heat sinks, large transformers, shields, and other connections where there is a significant amount of thermal inertia that must be overcome.
Discover the Hakko FR4003 Desoldering Gun for FR400-93 at Mektronics Australia – your trusted source for quality tools and equipment!
-
300W Heating Element with a top Controlled Temperature of 940 °F (500 °C) The high mass of the heater and nozzles combined with the power and control of the composite ceramic heating cartridge allows for rework of some of the most challenging solder joints at only 750 °F (400 °C) and without preheating!
-
Anti-Clogging The anti-clogging features help ensure instantaneous application of peak vacuum pressure to the solder joint, and prevent the premature release of the vacuum system before the solder has cleared the heater and is captured in the solder collector chamber.
-
Large Solder Collection Chamber The solder collection chamber is 3X larger in capacity than other Hakko desoldering stations, and it can be cleaned and re-used, reducing environmental waste.
|
Model |
FR-4003 |
|
Part No. |
FR4003-81 |
|
Power Consumption |
300W (29 V) |
|
Nozzle-to-Ground Resistance |
< 2 ohms |
|
Nozzle-to-Ground Potential |
< 2 mV |
|
Heater |
Composite Ceramic Cartridge |
|
Nozzles |
N60 Series |
|
Standard Nozzle (Included) |
N60-02 (1.0 mm / 0.04 in.) |
|
Cord Length |
1.2 m (4 ft.) |
|
Total Length (w/o Cord)1 |
183 mm (7.2 in.) |
|
Weight (w/o Cord)1 |
270 g (0.6 lb.) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
