Image for Illustrative Purposes Only
Galden LS230 Vapour Phase Fluid 5kg
SKU: C010200
LS230
DESCRIPTION
Features
Specifications
Shipping & Delivery
Galden LS230 Vapour Phase Fluid 5kg
During Vapor Phase Heating (VPH), parts are directly immersed in a heated vapor blanket. The saturated vapor condenses and transfers its latent heat of vaporization to the surface of the parts. VPH, also called condensation heating, is therefore a very versatile method of heat transfer. Galden perfluoropolyether (PFPE) fluids are available with boiling points from 165°C to 265°C and are adaptable for applications such as:
-
Polymer Thick Films
-
Solder Mask
-
Conductive Inks
-
Adhesives
-
Coatings
Discover the Galden LS230 Vapour Phase Fluid 5kg at Mektronics Australia – your trusted source for quality tools and equipment!
-
Low heat of vaporization
-
Vapor density greater than air
-
Excellent thermal and chemical stability
-
Good compatibility with materials
-
No flash or fire points
-
No auto-ignition point
-
No explosion hazards
| Typical Property | Units | LS/155 | LS/165 | LS/200 | LS/210 | LS/215 | LS/230 | HS/240 | HS/260 |
|
Boiling Point |
°C |
155 |
165 |
200 |
210 |
215 |
230 |
240 |
260 |
|
Density, 25°C |
g/cm³ |
1.76 |
1.77 |
1.79 |
1.80 |
1.80 |
1.82 |
1.82 |
1.83 |
|
Kinematic Viscosity, 25°C |
cSt |
1.40 |
1.60 |
2.50 |
2.90 |
3.80 |
4.40 |
5.30 |
7.00 |
|
Vapor Pressure, 25°C |
Torr |
<1 |
<1 |
<10¯¹ |
<10¯¹ |
<10¯¹ |
<10¯² |
<10¯² |
<10¯² |
|
Heat of Vaporization @ Boiling Point |
cal/g |
17 |
15 |
15 |
15 |
15 |
15 |
15 |
15 |
|
Surface Tension |
dynes/cm |
18 |
18 |
19 |
20 |
20 |
20 |
20 |
20 |
|
Average Molecular Weight |
a.m.u. |
700 |
740 |
870 |
920 |
950 |
1020 |
1085 |
1210 |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
