Image for Illustrative Purposes Only
Fluke TS19 Test Set With Banana Jacks to Alligator Clips-TS19 Complete
SKU: FLU19800003
19800003
DESCRIPTION
Features
Specifications
Shipping & Delivery
Fluke TS19 Test Set With Banana Jacks to Alligator Clips-TS19 Complete
The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
Discover the Fluke TS19 Test Set With Banana Jacks to Alligator Clips-TS19 Complete at Mektronics Australia – your trusted source for quality tools and equipment!
-
High impedance DataSafeTM operation in monitor mode
-
Tone (DTMF) and pulse operation
-
Last number redial
-
Polarity indication in talk mode
|
Electrical |
|
|
Loop Limit |
2.4 kΩmaximum at 48 VDC (nominal 15 mA minimum loopcurrent) |
|
DC Resistance (Talk Mode) |
150 Ωtypical at 80 mA current |
|
AC Impedance (Monitor Mode) |
Low impedance (Ring position) 600 Ωat 1 KHz typical |
|
Rotary Dial Output |
10 pps .5 pps |
|
Pulsing Rate |
60 % ± 2 % |
|
Percent Break |
800 ms typical |
|
Interdigit Interval Leakage During Break |
> 50 kΩ |
|
DTMF Output |
±1 % maximum |
|
Tone Frequency Error Level per Tone Pair |
dBm maximum, - dBm minimum |
|
High versus Low Tone Difference |
4 dB maximum |
| Physical | |
|
Length |
8.75 in (22.2 cm) |
|
Width |
2.375 in (6.03 cm) |
|
Height |
3.375 in (8.57 cm) |
|
Weight |
10.8 oz (.307 kg) maximum |
| Environmental | |
|
Temperature |
Operating: -5 °C to °C |
|
Drop |
1 meter, 4 times |
|
Altitude |
To 3,000 meters (10,000 feet) maximum |
|
Relative Humidity |
10 %to 80 % (non-condensing) |
|
Regulatory Standards Used |
47 CFR Part 15, Subpart B ICES-003 Issue 3 AS/NZS 3548 EMC Directive 89/336/EEC, EN 55022:98, EN 61326:97, A1:98 Annex C, EN 61000-4-2, EN 61000-4-3 LV Directive 73/23/EEC, EN 610010.1 (1993) |
|
Certifications and Compliance |
CAN/CSA-C22.2 No. 60950-1-03 |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
