Image for Illustrative Purposes Only
Fluke T90 Voltage and Continuity Testers T90
SKU: FLUT90
T90
DESCRIPTION
Features
Specifications
Shipping & Delivery
Fluke T90 Voltage and Continuity Testers T90
The compact Fluke T90 Voltage and Continuity Tester gives you fast test results the way you need them in a slim design. Large, easy-to-use buttons, bright backlit LED indicators and clear audible indicator give quick results in any work situation.
Two-pole voltage and continuity testers measure voltage, but just as important is when a two-pole tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That's what Fluke's redesigned two-pole testers give you.
Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever.
Discover the Fluke T90 Voltage and Continuity Testers T90 at Mektronics Australia – your trusted source for quality tools and equipment!
Fluke's two-pole voltage and continuity testers are built to work the way you work. They give you the best combination of safety, ease-of-use and fast answers available anywhere.
-
Designed according to IEC EN 61243-3:2014 to verify the absence of voltage "“ even with discharged batteries.
-
CAT IV 600 V, CAT III 690 V safety rating
-
With 4 ways to indicate the presence of voltage "“ LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present (digital display on T130, T150, vibration indicator on T110, T130, T150)
-
Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability.
-
Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
-
Backlit graduated scale and backlit indicators
-
Improved probe docking for secure storage.
-
Single-pole phase test offers fast identification of live conductors.
-
Push-on probe tips, probe tip protector and storage accessory.
-
Tip protector serves as an extra hand when opening UK electrical safety outlets.
-
Low battery indicator.
Features |
T150 |
T130 |
T110 |
T90 |
---|---|---|---|---|
Backlit LED indicator |
"¢ |
"¢ |
"¢ |
"¢ |
Backlit LCD digital display |
LCD |
LCD |
||
Continuity test"”visual results |
"¢ |
"¢ |
"¢ |
"¢ |
Continuity test"”audible results |
"¢ with on/off |
"¢ with on/off |
"¢ with on/off |
"¢ |
Vibratory indicator under load |
"¢ |
"¢ |
"¢ |
|
Display hold |
"¢ |
"¢ |
||
Voltage test |
"¢ |
"¢ |
"¢ |
"¢ |
Indication of polarity |
"¢ |
"¢ |
"¢ |
|
Resistance measurement |
"¢ |
|||
Switchable load |
"¢ |
"¢ |
"¢ |
|
Single pole test for phase detection |
"¢ |
"¢ |
"¢ |
"¢ |
Rotary field indicator |
"¢ |
"¢ |
"¢ |
|
Probe tip protection |
"¢ |
"¢ |
"¢ |
"¢ |
Voltage detection with discharged batteries |
"¢ |
"¢ |
"¢ |
"¢ |
Electrical torch function |
"¢ |
"¢ |
"¢ |
|
Wear indicator test lead wire |
"¢ |
"¢ |
"¢ |
"¢ |
Specifications |
T90 |
T110 |
T130 |
T150 |
---|---|---|---|---|
Voltage AC/DC |
12V - 690V |
12V - 690V |
6V - 690V |
6V - 690V |
Continuity |
0 - 400 kΩ |
0 - 400 kΩ |
0 - 400 kΩ |
0 - 400 kΩ |
Frequency |
0 / 40 - 400 Hz |
0 / 40 - 400 Hz |
0 / 40 - 400 Hz |
0 / 40 - 400 Hz |
Phase rotation |
- |
100 V - 690 V |
100 V - 690 V |
100 V - 690 V |
Resistance measurement |
- |
- |
- |
Up to 1999 Ω |
Response Time (LED indicator) |
< 0.5 s |
< 0.5 s |
< 0.5 s |
< 0.5 s |
200 kΩ input impedance |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
7k Ω input impedance (with load buttons pressed) |
- |
Current draw 30 mA @ 230 V |
Current draw 30 mA @ 230 V |
Current draw 30 mA @ 230 V |
Safety rating |
CAT II 690V CAT III 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
IP rating |
IP54 |
IP64 |
IP64 |
IP64 |
Power requirement |
2-AAA batteries |
2-AAA batteries |
2-AAA batteries |
2-AAA batteries |
Net weight |
280 g (9.9 oz) |
280 g (9.9 oz) |
280 g (9.9 oz) |
180 g (6.4 oz) |
Size (LxWxH) |
26 cm x 7 cm x 3.8 cm |
26 cm x 7 cm x 3.8 cm |
26 cm x 7 cm x 3.8 cm |
23 cm x 6.5 cm x 3.8 cm |
Warranty |
2 years |
2 years |
2 years |
2 years |
Country of origin |
Great Britain |
Great Britain |
Great Britain |
Great Britain |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.