Image for Illustrative Purposes Only
Fluke Socket Tester With Leds Rcd Test Button Beeper
SKU: FLUST240+/ANZ
ST240+/ANZ
DESCRIPTION
Features
Specifications
Shipping & Delivery
Fluke Socket Tester With Leds Rcd Test Button Beeper
The Fluke ST240+ RCD Socket Tester with Beeper checks that each wire in the outlet is properly connected to the building's electrical system. Via the bright LEDs and included chart, you can quickly and easily verify the wiring of an outlet. Able to identify several common wiring errors, including reversed live and neutral wires and an earth fault, the ST240+ will give you confidence on your next job.
Audible alert helps you work faster, safer
The ST240+ also gives you a unique audible alert anytime voltage is detected. Save time when trying to identify which circuit breaker is connect to which outlet. Just plug the socket tester in, walk to the circuit breaker panel, and listen for the beeper to turn off – or on – as you flip the breakers. Once it does, you’ve found the correct breaker. Time – and trips – saved.
When switched on, the integrated beeper can also alert you to hazardous voltage at the outlet, even if the wiring is incorrect. Working in an office, hospital or other location where you don’t want to interrupt others? No problem – the beeper can be switched off.
One-button RCD tests
The included RCD test button on the ST240+ Socket Tester with Beeper allows you to also test the operation of RCD outlets. With a single push, the ST240+ can verify the operation of your RCD equipped outlet. If the RCD trips as expected, perfect, you can move on. If not, it’s time to take a closer look.
Fast visual identification of all 6 wiring conditions
The ST240+ has three bright, easy-to-see LED indictors. This lets you see, at a glance, one of six wiring scenarios:
-
Correct installation
-
Earth fault
-
Neutral fault
-
Live fault
-
Live/neutral reversed
-
Live/earth reversed
Discover the Fluke Socket Tester With Leds Rcd Test Button Beeper at Mektronics Australia – your trusted source for quality tools and equipment!
-
Simple operation – Plug into socket; with the bright, easy-to-see LEDs, verify correct wiring or identify common wiring problems in both standard and RCD outlets
-
Know more, faster –with the handy chart, quickly identify one of six wiring conditions for the outlet
-
RCD outlets–with an integrated RCD test, you can feel secure knowing that your RCD equipped outlets are functioning properly
| Rated operating voltage | 230 V ac +/-10% at 4 mA |
| Wattage | .92 W typical |
| Frequency | 50 Hz |
| Integrated, switchable beeper | Yes |
| RCD test | Yes |
| Indicator lights | 1 red, 2 green LEDs |
| Rating | CAT II 300 V |
| Warranty | Two years |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
