Image for Illustrative Purposes Only
Fluke Networks CIQ-100 CableIQ Qualification Tester
SKU: FLUCIQ-100
CIQ-100
DESCRIPTION
Features
Inclusions
Specifications
Shipping & Delivery
Fluke Networks CIQ-100 CableIQ Qualification Tester
CableIQ finds common cable faults and data rate. Cables often fail in harsh industrial environments where cables are exposed to vibration, extreme flexing, moisture, expansion and contraction from temperature change. Failures result in costly production downtime so it's important to quickly identify where the cable is broken so it can be replaced or repaired. CableIQ checks continuity on all wires displays results graphically so you can see opens, shorts, and cross wires and reports the distance to an open connection within the cable. It also checks if the cable can support data rates.
Discover the Fluke Networks CIQ-100 CableIQ Qualification Tester at Mektronics Australia – your trusted source for quality tools and equipment!
Copper qualification tester troubleshoots and qualifies Ethernet network cabling speed (10/100/1000/VoIP)
-
Works on live networks to provide Ethernet switch detection and device configuration
-
Measure network capacity (10 Meg, 100 Meg, 1 Gig) to determine support for VoIP, data and video
-
Advanced troubleshooting diagnostics; insertion loss, cross talk, noise issues
-
Core troubleshooting features; length, distance to fault, graphical wire mapping, opens, shorts, power over Ethernet (POE) detection
-
Tests all copper cabling media: twisted-pair, coax, and audio
-
Locate and trace cables with digital toning technology. Requires IntelliTone 200 Digital Probe (included with CIQ-KIT)
-
Qualifies and troubleshoots Industrial Ethernet cabling
-
CableIQ with remote adapter
-
CableIQ Reporter software CD
-
(2) RJ45-RJ45 patch cord
-
USB cable
-
Coax 'F' push-on adapter
-
Owner's CD and quick start guide
-
(4) AA batteries
-
Soft carry case
|
Cable types supported |
UTP, STP, FTP, SSTP, RG6, RG59, audio and security |
|
Qualification autotests |
1000BASE-T, 100BASE-TX, 10BASE-T, VoIP, 1394b S100, TELCO, Wiremap only, Coax |
|
Supported tests |
Wiremap, length, cable signal performance, digital toner, analog toner, Ethernet port detection and identification, analog telephone detection, blink port light, continuity, speaker test, cable fault finding, video signal detection. |
|
Wiremap |
Can detect single wire faults and supports MultiMap mode with up to seven remote office identifiers. Draws proportional wire length to breaks. Detects split pairs. |
|
Find fault |
Measures crosstalk and impedance and compares against appropriate limits based on qualification test selected. Detects location of large point sources as well as distributed sources in the cabling if they are sufficient to disqualify the application |
|
Results storage |
Up to 250 qualification test results |
|
Power |
Battery type: 4 AA (NEDA 15A, IEC LR6) alkaline batteries |
|
Battery life |
20 hours of typical use, without backlight |
|
Other battery types supported |
4AA photo lithium, NIHM, NICAD |
|
Dimensions and weight |
7in x 3.5in x 1.75in (17.8cm x 8.9cm x 4.5cm) 1.2 lb (0.55 kg) |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
