Professional Acoustic Imaging
Professional Display: Integrating 16 high-precision MEMS sensors and combining with Fluke's SoundMapTM acoustic imaging technology, it can quickly locate the sound sources.
Wide applications: Covering the sound wave frequency band range from 2k Hz to 48k Hz, it applies to common industrial application scenarios such as air or gas leaks, air tightness detection, and noise location.
Leak mode: 40kHz frequency band can be enabled with a single key on the main menu, which is used for quick detection of air leaks.
dB shown: The screen shows the dB value of the target centerpoint in real time while locating leaks for additional assessments.
Unparalleled usability
Plug and Play: it is directly connected to the Type-C interface of your smart phone to start the test instantly.
Compact and light: It is made of high-quality aluminium material with an innovative compact design, which weighs only 50g and can be easily inserted in a pocket to use it anywhere and anytime.
Quick Start: It is designed with no buttons and a simplified user interface. You can get started in an instant without much setup time.
Direct share: Images and videos can be shared and reported anytime and anywhere via mobile phones.
Data Storage: You can take images and videos up to 5 minutes long, which are directly stored in your phone's library with custom watermarks added for storage archive.
Discover the Fluke II01 Acoustic Camera for Smartphone/Android II01/ANZ at Mektronics Australia – your trusted source for quality tools and equipment!
Fluke's SoundMap™ acoustic imaging technology is delivered with the integrated 16 high-precision MEMS sensors to quickly locate the source sounds.
Covering the sound wave frequency band range from 2k Hz to 48k Hz, it applies to common industrial application scenarios such as air or gas leaks, air tightness, and noise level and location.
40kHz leak mode frequency band can be enabled with a single key on the main menu for faster setup.
The screen shows the dB value of the target centerpoint in real time while locating leaks for additional assessments.
It is instantly started by connecting to the Type-C interface of your smart phone.
It is made of high-quality aluminium material with an innovative compact design, which weighs only 50g and can be easily inserted in a pocket to use it anywhere and anytime.
Quick Start: It is designed with no buttons and a simplified user interface. You can get started in an instant without much setup time.
Direct share: Images and videos can be shared and reported anytime and anywhere via mobile phones.
Data Storage: You can take images and videos up to 5 minutes long, which are directly stored in your phone's library with custom watermarks added for storage archive.
Fluke ii01 Acoustic Camera for Smartphone
Black carrying case
Packaging box
Getting Started Guide
| Microphones | 16 high-precision MEMS sensors |
| Frequency band | 2kHz to 48kHz |
| Detection range | 0.50 m to 50 m (based on site conditions) |
| Field of view (H x V) | 50° x 38° |
| Frame rate | 20 Hz |
| Sensitivity | -38 dBV |
| Signal-to-noise ratio | 73 dBA |
| Visible lens resolution | 2 MP |
| Acoustic image | SoundMap™ image |
| Quick leak detection mode | Leak mode enabled: Frequency band locks at 37.4 kHz to 42.6 kHz: Leak mode disabled: Frequency band selection through manual slider |
| dB value of the target centerpoint | Yes, it can be enabled or disabled |
| Focal length | 50cm to infinity |
| Image format | JPG, MP4 (up to 5 minutes) |
| Color palettes | 3: IronRed, Blue-Red and Grayscale |
| Palette: Color Blending % | Yes: 0 %-100 % |
| Customized watermark | Image or English characters watermarks |
| General Specifications | |
| Interface | Type-C |
| Operating system supported | Android / HarmonyOS |
| Operating temperature | 0 °C to +40 °C |
| Storage temperature | -30 °C to +60 °C |
| Operating humidity | 10% to 90% RH, non-condensing |
| Operating altitude | Up to 2000 m |
| Storage altitude | Up to 12000 m |
| Power consumption | 1.2 W (Typical) |
| Ingress protection | IEC 60529: IP54 |
| Size (L x W x H) | 61 x 50 x 12 mm |
| Weight | 50g |
| EMC Environment |
International IEC 61326-1: Electromagnetic environment for portable equipments CISPR 11: Group 1, Class A Group 1: Equipment intentionally generates and/or uses conductive-coupled RF energy, which is necessary for its internal operation. Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purposes. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Caution: This equipment is not intended for use in residential environments and may not provide adequate protection to radio reception in such environments. |
| Warranty | 2 years |
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.