Fluke BC500 AC Power Charger

Input
Nominal input voltage ................ 100 Vac to 240 Vac, ±10 %
Input current ............................... 0.35 A at max. load
Nominal input frequency ............ 50 Hz to 60 Hz ±5 %
Mains inlet .................................. IEC 60320-1 type C8
Input power, no load................... <0.1 W (@ 115 / 230 Vac)
Output
Output voltage............................ 18 Vdc ±5 %
Output current ............................ 0 mA to 840 mA
Output cable length .................... 2 m (6.5 ft)
Output connector ....................... 5.5 mm outer diameter, per DIN45232
Output polarity............................ Inner contact positive, outer contact negative
Physical characteristics
Dimensions of main unit............. 79 mm x 149 mm x 49 mm
Housing material ........................ Heat resistant ABS
Color (housing and cable) ..........Black
Weight ........................................ 0.35 kg
Ingress Protection ...................... IEC 60529, IP40
Environmental
Operating temperature ............... 0 °C to 50 °C, up to 90 % rel. humidity, no
                                                      condensation
Storage temperature ..................-40 °C to +70 °C, 10 % to 95 % rel. humidity
Max. altitude............................... 2000 m (6562 ft) above sea-level
Included accessories
Power cord ................................. 2-wire cord, with female connector acc.
                                                      IEC60320 style C7
Mains cord length....................... 1.8 m (6 ft), male to female
Safety ............................................. IEC 61010-1, IEC 61010-2-030: CAT IV 600 V,
                                                          Pollution Degree 2
Electromagnetic
Compatibility (EMC) ..................... IEC 61326-1: Industrial Electromagnetic
                                                       Environment

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.