Image for Illustrative Purposes Only
Fluke 771 Milliamp Process Clamp Meter
SKU: FLU771
771
About
Features
Includes
Specifications
Shipping & Delivery
Fluke 771 Milliamp Process Clamp Meter
OverviewThe Fluke 771 delivers all the basics. It measures 4-20 mA signals without "breaking the loop", allowing you to measure low level dc current while saving downtime and money. You can also use it to measure output signals from transmitters without breaking the loop when maintaining and troubleshooting process and automation equipment. This saves time and avoids disruption to the process. For more convenience, the detachable clamp can be attached to the wire you're testing while you move the meter—connected by the extension cable—to a better viewing position. This is especially helpful for taking readings in tight locations.
Discover the Fluke 771 Milliamp Process Clamp Meter at Mektronics Australia – your trusted source for quality tools and equipment!
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- Soft Carrying Case
- Users Manual
| Specifications | |||
| Diameter of measurable conductor | 0.177 in or 4.5 mm max | ||
| Operating temperature | -10 to 50°C | ||
| Storage temperature | -25 to 60°C | ||
| Operating humidity | < 90% @ < 30°C, < 75% @ 30 to 55°C | ||
| Operating altitude | 0 to 2000 m | ||
| IP rating | IP 40 | ||
| Size | 59 x 38 x 212 mm (2.32 x 1.5 x 8.35 in) | ||
| Weight | 260 G, (9.1 oz) | ||
| Vibration | Random 2 g, 5 to 500 Hz | ||
| Shock | 1 m drop test (except the jaw) | ||
| EMI/RFI | Meets EN61326-1 | ||
| For current measurement w/ JAW, add 1 mA to specification for EMC field strengths of 1 V/m up to 3 V/m. |
|||
| Temperature coefficient | 0.01% °C (< 18°C or > 28°C) |
||
| Power, battery life | (2) AA 1.5 V Alkaline, IEC LR6, 40 hours typical | ||
| Warranty | Three years for electronics One year for cable and clamp assembly |
||
| Functional Specifications | |||
| mA measurement (measured by clamp) |
Resolution / range | 0 to 20.99 mA | |
| Accuracy | 0.2% + 2 counts | ||
| Resolution / range | 21.0mA to 100.0 mA | ||
| Accuracy | 1% + 5 counts | ||
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
