Image for Illustrative Purposes Only
Fluke 6000A Fluke 430 Thin Flexi 61cm (24In)
SKU: FLUI430-FLEXI-TF-II
I430-FLEXI-TF-II
About
Shipping & Delivery
Fluke 6000A Fluke 430 Thin Flexi 61cm (24In)
Fluke 6000A Fluke 430 Thin Flexi 61cm (24In) Details
i430-Flexi-TF-II 6000A Flexible AC Current Probe
The i430-Flexi-TF-II flexible AC current probe is optimized for current measurement on thick and hard to reach conductors. The i430-Flexi-TF-II is a flexible AC current probe for use with the Fluke 430 series Power Quality Analyzers including Series II.
- Measuring range: 0.5 to 6000 A ac
- Bandwidth (-3 dB): 10 Hz to 10 kHz
- Output signal: 86.6 mV at 1000A/50Hz (on 1 MΩ), 85.0 mV at 1000A/50Hz (on 50 kΩ)
- Maximum non-destructive current: 100 kA (50/60 Hz)
- Transducer length: 610 mm (24 in)
- Transducer diameter: 7.5 mm (0.3 in)
- Minimum bending radius: 38 mm (1.5 in)
- Cable length from transducer to BNC: 2.5 m (98.4 in)
- Complies with: IEC 61010-1: Pollution degree 2, IEC 61010-2-032: 1000V CAT III/ 600V CAT IV, IEC 61010-031
Fluke 6000A Fluke 430 Thin Flexi 61cm (24In) Specifications
| Attribute | Value |
|---|---|
| Accessory Type | Flexible AC Current Probe |
| For Use With | Fluke 433/434/435/434-II/435-II/437-II |
Discover the Fluke 6000A Fluke 430 Thin Flexi 61cm (24In) at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
