Image for Illustrative Purposes Only
Fluke 179-2/IMSK Industrial Multimeter Service Kit
SKU: FLU179-2/IMSK
179-2/IMSK
DESCRIPTION
Features
Contents
Specifications
Shipping & Delivery
Fluke 179-2/IMSK Industrial Multimeter Service Kit
This kit combines the Fluke 179 True-RMS DMM and the Fluke 323 True-RMS clamp meter. Both tools are rugged, reliable and accurate, as well as extremely easy to operate.
Fluke 179 True-RMS Digital MultimeterThe Fluke 179 is the preferred solution for professional technicians around the world. It includes the features you need to troubleshoot and repair electrical and electronic systems:
-
Delivers accurate true-rms AC current and voltage plus frequency, capacitance, resistance, continuity and diode measurements
-
Increases productivity with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-average recording
-
Includes a built-in thermometer to measure temperature without having to carry a separate instrument
The Fluke 323 clamp meter provides true-rms measurements, optimized ergonomics, and large display for efficient troubleshooting. It's designed to perform in the toughest environments and provide noise-free, reliable results, so you can confidently diagnose problems almost anywhere.
-
Rugged, reliable basic true-rms clamp meter for measuring current up to 400 A
-
Measures AC current to 400 A
-
Measures AC voltage and DC voltage to 600 V
-
Provides true-rms AC voltage and current for accurate measurements on non-linear signals
-
Measures resistance to 4 kΩ with continuity detection
-
Features a CAT III 600 V, CAT IV 300 V safety rating
Discover the Fluke 179-2/IMSK Industrial Multimeter Service Kit at Mektronics Australia – your trusted source for quality tools and equipment!
-
A full-featured, true-rms multimeter combined with a rugged, reliable basic true-rms clamp meter
-
Ideal for troubleshooting electrical and electronic systems
-
Measures up to 1000 V ac or dc (179 DMM) and up to 400 A ac (323 clamp)
-
Fluke 179 True-RMS Digital Multimeter
-
Fluke 323 True-RMS Clamp Meter
-
80BK-A DMM Temperature Probe
-
TL75 Hard Point Test Lead Set
-
AC175 Threaded Alligator Clip Set
|
Voltage DC |
Accuracy1 |
±(0.09% + 2) |
|
Max. resolution |
0.1 mV |
|
|
Maximum |
1000 V |
|
|
Voltage AC |
Accuracy1 |
±(1.0% + 3) |
|
Max. resolution |
0.1 mV |
|
|
Maximum |
1000 V |
|
|
Current DC |
Accuracy1 |
±(1.0% + 3) |
|
Max. resolution |
0.01 mA |
|
|
Maximum |
10 A |
|
|
Current AC |
Accuracy1 |
±(1.5% + 3) |
|
Max. resolution |
0.01 mA |
|
|
Maximum |
10 A |
|
|
Resistance |
Accuracy1 |
±(0.9% + 1) |
|
Max. resolution |
0.1 Ω |
|
|
Maximum |
50 MΩ |
|
|
Capacitance |
Accuracy1 |
±(1.2% + 2) |
|
Max. resolution |
1 nF |
|
|
Maximum |
10,000 µF |
|
|
Frequency |
Accuracy1 |
±(0.1% + 1) |
|
Max. resolution |
0.01 Hz |
|
|
Maximum |
100 kHz |
|
| Temperature | Accuracy1 | ±(1.0% + 10) |
| Max. resolution | 0.1 °C | |
| Range | -40 °C / 400 °C | |
|
1. Accuracies are best accuracies for each function |
||
|
Environmental Specifications |
||
|
Operating temperature |
-10 °C to +50 °C |
|
|
Storage temperature |
-30 °C to +60 °C |
|
|
Humidity (without condensation) |
0% - 90% (0 °C - 35 °C) 0% - 70% (35 °C - 50 °C) |
|
|
Safety Specifications |
||
|
Overvoltage category |
EN 61010"“1 to 1000 V CAT III EN 61010"“1 to 600 V CAT IV |
|
|
Agency approvals |
UL, CSA, TÃœV listed and VDE Pending |
|
|
Mechanical and General Specifications |
||
|
Size |
43 x 90 x 185 mm |
|
|
Weight |
420 g |
|
|
Warranty |
Lifetime |
|
|
Battery life |
Alkaline ~200 hours typical, without backlight |
|
Fluke 323 True RMS Clamp Meter
|
Specifications |
||
|
AC current |
Range |
400.0 A |
|
Accuracy |
2% ± 5 digits (45 Hz to 65 Hz) 2.5% ± 5 digits (65 Hz to 400 Hz) |
|
|
DC current |
Range |
- |
|
Accuracy |
- |
|
|
AC voltage |
Range |
600.0 V |
|
Accuracy |
1.5% ± 5 digits |
|
|
DC voltage |
Range |
600.0 V |
|
Accuracy |
1.0% ± 5 digits |
|
|
Resistance |
Range |
400.0 Ω/ 4000 Ω |
|
Accuracy |
1.0% ± 5 digits |
|
|
Continuity |
≤ 70 Ω |
|
|
Capacitance |
- |
|
|
Frequency |
- |
|
|
AC response |
True-RMS |
|
|
Backlight |
- |
|
|
Data hold |
Yes |
|
|
Contact temperature |
- |
|
|
Min/Max |
- |
|
|
Size |
H x W x D (mm) |
207 x 75 x 34 |
|
Max wire diameter |
30 mm (600 MCM) |
|
|
Weight |
265 g |
|
|
Category rating |
CAT III 600 V CAT IV 300 V |
|
|
Warranty |
Two-year |
|
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
