Fluke 177 True-RMS Digital Multimeter
The three models of the Fluke 170 Series True RMS digital multimeters are the benchmarks for general purpose multimeters. They set the standard with a combination of precision, features, ease-of-use, safety and reliability.
Discover the Fluke 177 True-RMS Digital Multimeter at Mektronics Australia – your trusted source for quality tools and equipment!
- True RMS voltage and current measurements
- 0.09% basic accuracy (177, 179)
- 6000 count resolution
- Digital display with analog bargraph and backlight (177, 179)
- Manual and automatic ranging
- Display Hold and Auto Hold
- Frequency and capacitance measurements
- Resistance, continuity and diode measurements
- Temperature measurements (179)
- Min-max-average recording
- Smoothing mode allows filtering of rapidly changing inputs
- Easy battery exchange without opening the case
- Closed case calibration through front panel
- Ergonomic case with integrated protective holster
- EN61010-1 CAT III 1000V / CAT IV 600V
- Measures twice as fast as other multimeters
Safety conformance
All inputs are protected to IEN61010-1 CAT IV 600V/CAT III 1000V. CSA, TÜV listed.
| Specifications |
| Voltage DC |
| 175 - Accuracy* |
± (0.15%+2) |
| 177 - Accuracy* |
± (0.09%+2) |
| 179 - Accuracy* |
± (0.09%+2) |
| Max. Resolution |
0.1 mV |
| Maximum |
1000 V |
|
| Voltage AC |
| Accuracy* |
± (1.0%+3) |
| Max. Resolution |
0.1 mV |
| Maximum |
1000 V |
|
| Current DC |
| Accuracy* |
± (1.0%+3) |
| Max. Resolution |
0.01 mA |
| Maximum |
10 A |
|
| Current AC |
| Accuracy* |
± (1.5%+3) |
| Max. Resolution |
0.01 mA |
| Maximum |
10 A |
|
| Resistance |
| Accuracy* |
± (0.9%+1) |
| Max. Resolution |
0.1 Ω |
| Maximum |
50 MΩ |
|
| Capacitance |
| Accuracy* |
± (1.2%+2) |
| Max. Resolution |
1 nF |
| Maximum |
10,000 µF |
|
| Frequency |
| Accuracy* |
± (0.1%+1) |
| Max. Resolution |
0.01 Hz |
| Maximum |
100 kHz |
|
| Temperature |
| 179 - Accuracy* |
± (1.0%+10) |
| Max. Resolution |
0.1°C |
| Range |
-40°C/400°C |
|
| Note |
| * |
Accuracies are best accuracies for each function |
|
|
|
| Operating Temperature |
|
| Storage Temperature |
|
| Humidity (Without Condensation) |
|
0% - 90% (0°C - 35°C) |
|
0% - 70% (35°C -50°C) |
|
| Safety Specifications |
| Overvoltage category |
|
EN 61010-1 to 1000 V CAT III. |
|
EN 61010-1 to 600 V CAT IV. |
|
| Agency Approvals |
|
UL, CSA, TÜV listed and VDE Pending |
|
| Mechanical & General Specifications |
| Size |
|
| Weight |
|
| Warranty |
|
| Battery Life |
| Alkaline: |
~200 hours typical, without backlight |
|
Resources
User Manual
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
