Dewalt 18V XR Brushless Concrete Angled Nailer Kit DCN890P2-XE
Image for Illustrative Purposes Only
Dewalt Logo

Dewalt 18V XR Brushless Concrete Angled Nailer Kit DCN890P2-XE

SKU: DEWDCN890P2-XE

DCN890P2-XE

$1,307.91

EX. GST
$1,438.70
INC GST
In Stock

Order before 2pm today for same day dispatch of up to units from our Sydney warehouse.

own it from $10 a week with Group 2 Copy Created with Sketch.

Includes
Shipping & Delivery

Dewalt DCN890N-XE 18V XR Li-ion Cordless Brushless Concrete Angled Nailer

Overview

The DCN890 concrete nailer is the first battery tool able to drive 13mm nails into steel as well as up to 57mm into concrete. Pin range includes standard for concrete, Heavy duty for high shear loads and XH for extra hard concrete and steel (13mm only).

Features

  • Easy Maintenance by replacing driver blade under 2 minutes, field serviceable by user

  • Tool-Free Stall Release returns driver if too is stalled or jammed

  • Removable Nose Piece is interchangeable for versatility(MEPD) and allows tool-free maintenance

  • Brushless Motor is Comparable speed to gas nailer

  • Gas Free Operation with up to 600 shots per charge

  • Consistency in wide temperature and altitudinal ranges

  • Single/Rapid Mode & Power Adjustment

  • 3 setting for pin depth adjustment

  • Featured high capacity (33 pins) magazine is angled for access in tight areas and removeable for tool-free maintenace

  • Dual LEDS illuminate work surface and provide diagnostics on tool

Specifications

  • Voltage: 18V

  • Trigger Type: Bump and Sequential Rapid Cycle

  • Magazine Capacity: 30

  • Magazine Type: Angled

  • Magazine Capacity: 33

  • Reach Into Track: 68mm

  • Fastener Type: 15° Plastic Collated Nails

  • Fastener Range: 13-35mm

  • Recoil (at trigger): Concrete: 5.0; Steel: 6.2

  • Weight: 4.2kg

DeWalt DCB184-XE 18V 5.0Ah XR Li-Ion Cordless Slide Battery

Features

  • Deliver 66% more runtime than a standard 3.0Ah battery pack

  • LED state of charge indicator to help manage pack charging

  • Lightweight design that provides the user with upgraded 5.0Ah power without increasing the size or weight over the 18V 3.0Ah battery pack

  • No memory effect and virtually no self-discharge for maximum productivity & less downtime

  • Protection against overheating, overloading and deep discharge conditions which increases the overall battery life

  • Compatible with all DEWALT XR Li-Ion 18V Tools

Specifications

  • Voltage: 18V

  • Battery type: Slide

  • Amps: 5.0Ah

  • Weight: 0.6kg

DeWalt DCB115-XE XR Li-ion Cordless 10.8V - 18V Multi-voltage Charger

Overview

The DCB115-XE is easy to use, quiet and exceptionally stable, this DeWalt charger plugs directly into the wall. The DCB115-XE features a built-in diagnostics system with an LED indicator that communicates battery charging, battery charged, power line problem, replace battery and battery too hot or cold to charge.

Features

  • Compatible with DeWalt 10.8V, 14.4V and 18V Li-ion slide batteries

  • Diagnostics with LED indicator for battery charge status of charged, charging, power line problem, replace pack or battery temperature problem

  • Wall mountable design

Specifications

  • Voltage: 10.8V, 14.4V, 18V

  • Battery Chemistry: Li-ion

  • Dimensions (L X W X H): 120mm x 150mm x 100mm

  • Weight: 1kg

 

Discover the Dewalt 18V XR Brushless Concrete Angled Nailer Kit DCN890P2-XE at Mektronics Australia – your trusted source for quality tools and equipment!

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.