Desco Ws Aware Monitor 4.20Ma Out Standard Remotes

Dual Workstation Continuous Monitor
Continuously monitors the path-to-ground integrity of two operators, two conductive or dissipative worksurfaces, and two metal tools; meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01
Digital Signal Processing Technology
Applies an ultra-low test voltage to the operator (0.05V) for the handling of sensitive components
Operator Body Voltage Detection
Alarms if the operator generates or comes in contact with voltage that would be dangerous to an ESD susceptible item
EMI Monitoring on Metal Grounds
Alarms if the grounded metal tools have high-frequency noise that could cause electrical overstress (EOS) damage
System Includes Monitor and Two Remote Terminals
Monitor can be installed at eye level, and remote terminals can be mounted at desired locations up to 10 feet away. Each remote terminal includes a monitored jack for operators and an unmonitored jack for visitors.

• Remote Terminals with Big Brother Sensor
• Detects the presence of an operator and alarms if a wrist strap is not connected to prevent ungrounded handling of ESD susceptible items
• Analog Data Output (4.20 mA)
• Interfaces with data acquisition systems that accept a 4.20 mA input signal
• Use with Dual-Wire Wrist Straps
• See SCS Dual-Wire Wrist Straps
• Replaceable Dual-Wire Operator Jack
• Use the CTA245 Replacement Jack PCB to easily replace the operator jack without the use of solder
• Calibration Unit Available for Accurate Performance and Conformity Testing in the Field
• NIST Calibrated with Certificate Included
• Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
• 100-240VAC Power Adapter with Interchangeable Plugs
• Works with standard electrical systems in North America, United Kingdom, Japan, Asia and Europe
• Assembled in the United States of America with Globally Sourced Materials

SHIPPING

A delivery and handling charge applies to all orders with the exception of back-ordered items.

Unless otherwise required by Buyer, Seller will make transport arrangements as follows:

For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods

For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.

Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.

Free shipping on orders over $175 excluding GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.

DELIVERY TIME

All quoted delivery or consignment dates are estimates only, given without engagement.

Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.

Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer

a) in the event of a delay in consignment or delivery of goods: or

b) in the event of non delivery.

Goods offered ex-stock by Seller are subject to prior sale.

In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.