Image for Illustrative Purposes Only
Desco Statguard Static Dissipative Floor Finish, 5 Gal
SKU: DES10512
10512
DESCRIPTION
Features
Shipping & Delivery
Desco Statguard Static Dissipative Floor Finish, 5 Gal
is a cross linked polymer used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber and other flooring types*). It creates a dissipative (1 x 107 to < 1 x 1010 ohms per ANSI/ESD S7.1 and ESD TR53) and Low Tribocharging (<100 volts per ANSI/ STM 97.2) coating that meets or exceeds ANSI/ESD S20.20 minimum requirements for use as a primary grounding method and for charge generation of the flooring/footwear system. Desco Statguard Static Dissipative Floor Finish is 3-coat, 18% solids system (Approx 2000 sg/ft/gallon) that reduces dry time and labor needed for initial install and on-going maintenance.
Discover the Desco Statguard Static Dissipative Floor Finish, 5 Gal at Mektronics Australia – your trusted source for quality tools and equipment!
- Low-tribocharging
Limits charge generation when walking, - Static dissipative
With ESD footwear, removes the charge off your body - Can be applied on many hard surfaces or sealed floors including vinyl, VCT, linoleum, rubber, epoxy, acrylic paint, and concrete
Converts a non-ESD floor to an ESD floor -
UL classified for slip resistance only
Ensures worker safety and mitigates user€™s liability exposure - 18% solids
Easy to apply; improves productivity - Cross-linked polymer
Produces high-gloss, durable finish - Low humidity formulation
Provides greater durability in all humidity environments - RTT 10E7 ohms per ANSI/ESD S7.1 @50% R.H.
- Bag-in-box packaging
- Lead-free RoHS compliant
- Made in America
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
