Image for Illustrative Purposes Only
Desco 19337 Multi-Mount Continuous Monitor with Universal Plug
SKU: DES19337
19337
Features
Shipping & Delivery
-
Single Workstation Continuous Monitor: Continuously monitors the path-to-ground integrity of one operator and one ESD worksurface
-
Park Delay Timer and ParkSnap™: Indicates the 8 second delay to disconnect and park the operator wrist cord without creating a false alarm
-
Light Tower Compatibility: Connects with the 19332 Light Tower accessory
-
Wave Distortion Technology: Provides stable continuous monitoring (versus pulsed or intermittent) of the wrist strap’s path-to-ground* and the presence of its 1 megohm safety resistor
-
Mat Monitor Switch: Disables the worksurface monitor circuit when used in areas where there is no ESD worksurface
-
Audible Alarm Adjustment: Sets the audible alarm volume from loud to louder
-
Enclosure with Mounting Tabs: Installs in workbench and equipment environments
-
Single-Wire Impedance Design: Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-0
-
1.2 Volt Operator Test Voltage: Reduces the risk of electrical overstress (EOS) for the handling of sensitive components
-
<50 Millisecond Alarm Response Time: Identifies failures and intermittencies
-
Calibration Verification: Use the Desco 98221 Wave Distortion Monitor Verification Tester to check the test limits of Wave Distortion Monitors without removing them from their workstations
-
NIST Calibrated – Calibrated with accepted procedures and standards traceable to the National Institute of Standards and Technology.
-
100-240VAC NRTL Listed Power Adapter with IEC C14 Style Inlet: Connects to a power cord with an IEC C13 connector.
-
Made in the United States of America
*The ESDA Wrist Strap standard is ANSI/ESD S1.1. The Wrist Strap System required limit per ANSI/ESD S20.20 Table 3 is 0.8 to 1.2 x 106 ohms with product qualification testing perANSI/ESD S1.1. The test range of the monitored circuit is 500 kilohms to 10 megohms.
Discover the Desco 19337 Multi-Mount Continuous Monitor with Universal Plug at Mektronics Australia – your trusted source for quality tools and equipment!
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
