Image for Illustrative Purposes Only
Desco 06770 Equipment Containing ESDS Label, 19mm x 51mm, 500/RL
SKU: DES06770
DES06770
DESCRIPTION
Features
Shipping & Delivery
Desco 06770 Equipment Containing ESDS Label, 19mm x 51mm, 500/RL
MIL-STD-1686C states
"Equipment containing ESDS parts and assemblies shall be marked with the EIA RS-471 symbol*. The symbol shall be located on the exterior surface of the equipment and readily visible to personnel prior to gaining access to ESDS parts and assemblies within the equipment. The following ESD caution statement should be placed adjacent to the
RS-471 symbol: "CAUTION, CONTAINS PARTS AND ASSEMBLIES SUSCEPTIBLE TO DAMAGE BY ELECTROSTATIC DISCHARGE (ESD)."
* Note: EIA RS-471 symbol and ESD Association symbol outlined in ESD S 8.1, Figure 1A, the ESD susceptibility symbol are the same symbol.
Per ESD Handbook TR20.20 states Marking of Assemblies and Equipment "Marking of hardware items (assemblies and equipment) can be accomplished by using the [susceptibility] symbol. Military organizations sometimes use MIL-STD-1285 for hardware marking and that document once required the use of the "three arrows in a circle" symbol. That symbol has been changed for consistency with industry marking to the "hand in triangle" symbol. Marking of hardware is dependent on space available on the item itself as well as the environment the item will operate in and whether marking will hinder the operation of the item. Some hardware labels might contain nomenclature along with the symbol. Wording such as, "Caution, contains assemblies susceptible to damage by electrostatic discharge (ESD)" may be included, again depending on available space."
Discover the Desco 06770 Equipment Containing ESDS Label, 19mm x 51mm, 500/RL at Mektronics Australia – your trusted source for quality tools and equipment!
- Label for equipment that contains ESDS
- Identifies equipment that when opened has ESD sensitive (ESDS) items that are susceptible to ESD damage
- 3" core, 500 labels per roll
- RoHS 2, REACH and Conflict Minerals compliant
- is made in the United States of America
SHIPPING
A delivery and handling charge applies to all orders with the exception of back-ordered items.
Unless otherwise required by Buyer, Seller will make transport arrangements as follows:
For deliveries within the metropolitan areas of mainland State capital cities a standard freight charge may be added to invoice; goods
For delivery outside those areas, seller will select the transport to be used and prepay freight for Buyer. Seller will then bill Buyer for freight at Seller's discretion.
Should the Buyer request goods be sent to a Post Office box the Buyer acknowledges this method is the only available and therefore the Seller is not liable for undelivered goods.
Free shipping on orders over $199 incl GST (valid for 1 delivery per order and excludes NT, WA & TAS). If only part of the order is in stock, the customer has the option of paying for a second delivery if they require a partial shipment prior to all goods becoming available. Mektronics Australia reserves the right to charge additional freight in the event of hazardous, bulky or heavy items ordered.
DELIVERY TIME
All quoted delivery or consignment dates are estimates only, given without engagement.
Delay in consignment of any part of an order shall not relieve Buyer of its obligation to accept and pay for the remainder of the order.
Except as provided in paragraph 1.2 of Terms & Conditions, seller will not be liable to pay damages or compensation for any injury or loss sustained by Buyer
a) in the event of a delay in consignment or delivery of goods: or
b) in the event of non delivery.
Goods offered ex-stock by Seller are subject to prior sale.
In the event of any happening beyond Seller's reasonable control in consequence of which Seller cannot effect consignment by the time or times quoted or specified, Seller shall be entitled to consign part only of an order, suspend consignment or extend the time for consignment, for the period during which such cause of delay operates, or may cancel the order, and in the event of such suspension, extension or cancellation, Seller shall not be liable for damages.
